DeWalt DWE4599N Arsenic and chromium from chemically-treated lumber, Minutes, Alternating or

or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

•Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.

WARNING: Use of this tool can generate and/or disburse dust, which may cause and permanent respiratory or other injury. Always use AS/NZS1716 approved

protection appropriate for the dust exposure. Direct particles away from and body.

WARNING: Always wear proper personal hearing protection that conforms to during use. Under some conditions and duration of use, noise from this

may contribute to hearing loss.

•The label on your tool may include the following symbols. The symbols and their definitions are as follows:

V			volts	A			amperes
Hz			hertz	W			watts
min			minutes			or AC	alternating current
		or DC	direct current			or AC/DC	alternating or
	...................		Class I Construction				direct current
			(grounded)	no			no load speed
	...................		Class II Construction	n			rated speed
			(double insulated)				earthing terminal
					.......................
…/min			per minute		.......................		safety alert symbol
BPM			beats per minute	IPM			impacts per minute
RPM			revolutions per minute	SPM			strokes per minute
sfpm			surface feet per minute

SAVE ALL WARNINGS AND INSTRUCTIONS FOR

FUTURE REFERENCE

COMPONENTS (FIG. 1)

WARNING: Never modify the power tool or any part of it. Damage or personal

injury could result.
A. Trigger switch	G. Side handle
B. Lock-off button	H. LED indicator
C. Lock-on button	I. Anti-vibration ring
D. Spindle lock button	J. Dust ejection port
E. Spindle (Fig. 9)
F. Guard

FIG. 1

	J
		H
D
	G	A
F		C
		I
		B

7