Harbor Freight Tools 95578 operating instructions Angle Grinder

Page 1

4-1/2” ANGLE GRINDER

Model 95578

ASSEMBLY AND OPERATING INSTRUCTIONS

Due to continuing improvements, actual product may differ slightly from the product described herein.

®

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at: http://www.harborfreight.com

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

Copyright© 2006 by Harbor Freight Tools® All right reserved. No portion of this

.

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions, please call 1-800-444-3353.

Image 1
Contents 2 Angle Grinder General Safety Rules Product SpecificationsSave this Manual Work AreaPersonal Safety Electrical SafetyTool USE and Care Service Specific Safety RulesPage Grounded Tools Tools with Three Prong Plugs GroundingDouble Insulated Tools Tools with TWO Prong Plugs This Product Does not USE a Prong PlugThis Product Uses a Prong Plug Extension Cords Recommended Minimum Wire Gauge for Extension CordsAssembly Instructions SymbologyUnpacking Figure E Operating InstructionsFigure G INSPECTION, MAINTENANCE, and CleaningProblem Possible Solution TroubleshootingDescription Parts List and Assembly DiagramImportant Warranty Information Limited 90 DAY Warranty