8.Use only
9.Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Angle Grinder.
10.Do not force the Angle Grinder. This tool will do the work better and safer at the speed and capacity for which it was designed. Do not force the rotating grinding wheel (not included) into the object being ground. Apply moderate pressure, allowing the grinding wheel to rotate freely without being forced.
11.
WARNING! Never install a carbide tipped or steel circular saw blade for use on this tool. Never install a wood carving blade, carving disc with saw chain cutters, or a cutting carving disc on this tool.
12.For safest operation, it is recommended that only these accessories be used with this tool: Abrasive
13.Never lay this tool down until the rotating grinding wheel has come to a complete stop. The rotating grinding wheel can grab the surface and pull the tool out of your control.
14.Never leave the Angle Grinder unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from the electrical outlet before leaving.
15.Always unplug this tool from its electrical outlet before performing inspec- tion, maintenance, or cleaning procedures.
16.
WARNING! Keep hands and fingers away from cutting area and rotat- ing grinding wheel.
17.Before using the Angle Grinder, always check to make sure the grinding wheel (not included) is properly mounted and is not cracked or dull.
18.Industrial applications must follow OSHA guidelines.
19.The grinding wheel (not included) will become hot while cutting. Allow the grinding wheel to completely cool before handling.
20.To avoid accidental injury, always wear heavy duty work gloves when changing the grinding wheel.
21.
WARNING! Some dust created by power sanding, sawing, grinding, drilling,
SKU 95578 For technical questions, please call