SECTION 2: SETUP
This machine presents serious injury hazards to untrained users. Read through this entire manu- al to become familiar with the controls and opera- tions before starting the machine!
Wear safety glasses dur- ing the entire setup pro- cess!
This machine and its com- ponents are very heavy. Get lifting help or use power lifting equipment such as a forklift to move heavy items.
Model H7507 (Mfg. since 3/05)
Needed for Setup
The following are needed to complete the setup process, but are not included with the router table. Additional tools may be necessary if drilling or tapping is required to install it.
Description |
| Qty | |
• | Safety Glasses | 1 | |
• | Cleaner/Degreaser (Page 10) | As Needed | |
• | Disposable Shop Rags | As Needed | |
• | Another Person | 1 | |
• | Straightedge 4' | 1 | |
• | Screwdriver Phillips #2 | 1 | |
• | Wrenches or Sockets 8, 10, 14mm | 1 Ea | |
• | Drill Bit 3⁄16", 3⁄8" | 1 Ea | |
• | Wood 11⁄2" x 21⁄2" x 28" | 1 | |
• | Wood 23⁄4" x (Fence Thickness) x 28" | 1 | |
• | Jointer | 1 | |
• | *Wood Screws #10 x 2 | 4 | |
*Size may vary depending on thickness of infeed and outfeed fence boards.
Unpacking
Your machine was carefully packaged for safe transportation. Remove the packaging materials from around your machine and inspect it. If you discover the machine is damaged, please imme- diately call Customer Service at (570)
Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi- tion of your shipment, inventory the contents.