Baldor MN903 instruction manual Grounding Instructions, Operation

Page 5

Grounding Instructions Continued

4.Permanently connected grinders:

This grinder should be connected to a grounded, metal, permanent wiring system; or to a system having an equipment–grounding conductor.

Figure A

Figure B

Figure C

Figure D

 

Cover of

Adapter

 

 

Grounded

 

 

 

Outlet Box

 

 

 

Cover of

 

 

Grounding

Grounded

Grounding

Grounding

Blade

Outlet Box

Means

Blade

Operation

 

WARNING:

Do not operate this grinder until you are sure that you are completely familiar with the safe

 

operation of the grinder, all accessories and safety equipment. Improper use can lead to

 

severe injury. This manual defines proper use of this equipment. Before using this

 

equipment for any other use, please consult Baldor. Contact Baldor if you do not

 

understand any procedure or operation concerning this grinder or this manual.

WARNING:

When starting a grinder for the first time, or after installing a replacement grinding wheel,

 

it is most important that the operator stand aside for at least one minute of rotation at full

 

speed. This is the correct practice since grinding wheels can disintegrate if they have

 

received damage during shipping or handling.

 

Check that the On–Off switch is in the “OFF” position, and the grinding wheel and wheel

 

move freely. When starting the grinder for the first time or after replacing a wheel, it is

 

important that the operator stand aside for at least one minute of operation at speed. This will

 

ensure that operation will be safe from debris. After connecting grinder to power source, turn

 

switch on. Grinder should come up to speed smoothly and without vibration. If grinder does

 

not, shut grinder off immediately and determine reason.

 

As grinding wheel wears, maintain 1/ or less clearance between tool rest and grinding wheel

 

8

 

and spark arrestor and grinding wheel.

 

Grind on grinding face (periphery) of wheels only.

MN903

5

Image 5
Contents Safety Notice Equipment or work area when not in use Safety NoticeGauge number, the heavier the cord Reproductive harmGinder Wheel InstallationElectrical Instructions Operation Grounding InstructionsMinimum Gauge Wire Size MN903 Limited Warranty