Table of Contents, Important Notice

INTRODUCTION	2
Manual Accuracy	2
Contact Info	2
Router table Description	2
Specifications	3
SECTION 1: SAFETY	4
Safety Instructions for Machinery	4
Additional Safety for Router Tables	6
SECTION 2: SETUP	7
Needed for Setup	7
Unpacking	7
Inventory	8
Assembly	9
Router Installation	11
Aligning Router Mounting Board	12

SECTION 3: OPERATIONS	13
Operation Overview	13
Workpiece Inspection	14
Squaring Fence & Table	14
Edge Jointing	15
Profile Routing	16
Routing Small Stock	16
Free-Hand Routing	17
SECTION 4: MAINTENANCE	19
Schedule	19
Cleaning & Protecting	19
SECTION 5: PARTS	20
Stand & Fence Parts	20
Table Parts & Labels	21
WARRANTY AND RETURNS	24

IMPORTANT NOTICE!

Modification Required for Mounting Your Router

The universal phenolic mounting board that is included with the Model T10432 does not have pre-drilled mounting holes to hold your router. This is because different brand routers have different base mounting hole configurations.

To properly use this router table, you will have to drill holes in the mounting board that match the base mounting hole configuration of your router. This procedure will require a drill, the correct size drill bits, and possibly additional fasteners for mounting the router.

Before beginning any modification to the phenolic mounting board, read the entire SETUP section in this manual to make sure the person making the modification is capable of performing the required tasks, and to make sure that your router is firmly secured to the router mounting board.