Grizzly T10432 owner manual Inventory Figure Qty

Inventory

The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.

If any non-proprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

Inventory (Figure 1)		Qty
A. Router Mounting Board 3 7⁄8" ID		.................. 1
	—Insert 2 5⁄8" ID	1
	—Insert 1 1⁄4" ID	1
B.	Fence Support	1
C.	Fence Boards	2
D.	Guard	1

O. Hardware (Not Shown):
—Hex Bolts M6-1 x 18 (Table/Braces)		4
—Fender Washers 6mm (Table/Braces)		4
—Carriage Bolts M8-1.25 x 10 (Stand)		32
—Flat Washers 8mm (Stand)		32
—Hex Nuts M8-1.25 (Stand)		32
—Hex Bolts M8-1.25 x 25 (Fence)		6
—Flat Washers 8mm (Fence)		6
—Star Knobs M8-1.25 (Fence)		6
—T-Bolts M6-1 x 25 (Guard)		2
—Flat Washers 6mm (Guard)		2
—Tri-Knobs M6-1 (Guard)		2
—Phillips Head Screws M5-.8 x 55		2
—Starting Pin		1
—Hex Wrench 3mm		1
B
	C

E.	Table	1
F.	Fence Scale Tapes	2
G.	Rubber Feet	4
H.	Long Bottom Stand Braces 27 1⁄4"	2
I.	Long Top Stand Braces 20 1⁄2"	2
J.	Short Bottom Stand Braces 19 3⁄4"	2
K.	Short Top Stand Braces 15 3⁄4	2
L.	Dust Port Housing	1
M.	Stand Legs 33"	4
N.	Dust Port 2 1⁄2"	1

A

G

H

I

J

K

F

ED

M

L
	N

NOTICE

If you cannot find an item on this list, check the mounting location on the machine or the packaging materials. Sometimes parts are pre-installed for shipping, or they become hidden by packaging materials.

-8-

Figure 1. Model T10432 inventory.

Model T10432 (Mfg. Since 11/10)