Apex Digital K1106 installation instructions Zones 1 8 System Controller, Control Board Loop

Zones 1 - 8: System Controller

At default, all 8 system inputs are disabled. To enable a hardware input, enter a zone type in the zone type location.

Example: To enable Zone 1 (Input 1) and assign it as an Exterior Instant, enter 0647,000

Generally, this is all of the programming necessary to activate a zone. There are 4 spaces in each zone record to note a zone description. At the end of the zone programming section are detailed instructions for entering zone descriptions and a complete listing of the system vocabulary.

Other options:

Each input is defaulted to use a single End-Of-Line Resistor(EOLR). For certain installations, it may be necessary to use full 2-resistor supervision or for ease of installation, no EOLR. To adjust the supervision setting, enter the appropriate value in the supervision location.

OptionsValue

2 end-of-line resistor supervision .................................................................................................... 064

No end of line resistor (Not permitted in a UL installation) ............................................................. 128

Default (1 end-of-line resistor) ....................................................................................................... 000

Zone 1

Input	Control Board Loop 1
Option	Location	Default	New Value
Zone Type	0647	255
Option 1	0643	080
Option 2	0644	000
Supervision	1106	000
Word 1		Word 3
Word 2		Word 4

Zone 2

Input	Control Board Loop 2
Option	Location	Default	New Value
Zone Type	0663	255
Option 1	0659	080
Option 2	0660	000
Supervision	1110	000
Word 1		Word 3
Word 2		Word 4

	Zone 3
Input	Control Board Loop 3
Option	Location	Default	New Value
Zone Type	0679	255
Option 1	0675	080
Option 2	0676	000
Supervision	1114	000
Word 1		Word 3
Word 2		Word 4

Zone 4

Input	Control Board Loop 4
Option	Location	Default	New Value
Zone Type	0695	255
Option 1	0691	080
Option 2	0692	000
Supervision	1118	000
Word 1		Word 3
Word 2		Word 4

Zone 5

Input	Control Board Loop 5
Option	Location	Default	New Value
Zone Type	0711	255
Option 1	0707	080
Option 2	0708	000
Supervision	1122	000
Word 1		Word 3
Word 2		Word 4

Zone 6

Input	Control Board Loop 6
Option	Location	Default	New Value
Zone Type	0727	255
Option 1	0723	080
Option 2	0724	000
Supervision	1126	000
Word 1		Word 3
Word 2		Word 4

Zone 7

Input	Control Board Loop 7
Option	Location	Default	New Value
Zone Type	0743	255
Option 1	0739	080
Option 2	0740	000
Supervision	1130	000
Word 1		Word 3
Word 2		Word 4

	Zone 8
Input	Control Board Loop 8
Option	Location	Default	New Value
Zone Type	0759	255
Option 1	0755	080
Option 2	0756	000
Supervision	1134	000
Word 1		Word 3
Word 2		Word 4

21