Apex Digital K1106 Zones 18 23 Alarm Type Transmitters, Zones 24 25 Portable Transmitters

Zones 18 - 23: Alarm Type Transmitters Continued

Zone 18

Input	Transmitter 9	Serial #:
Option	Location	Default	New Value
Device	1248	005
Loop	1245	130
Zone Type	0919	255
Option 1	0915	080
Option 2	0916	000
Word 1		Word 3
Word 2		Word 4

Zone 19

Input	Transmitter 10	Serial #:
Option	Location	Default	New Value
Device	1260	005
Loop	1257	130
Zone Type	0935	255
Option 1	0931	080
Option 2	0932	000
Word 1		Word 3
Word 2		Word 4

Zone 20

Input	Transmitter 11	Serial #:
Option	Location	Default	New Value
Device	1272	005
Loop	1269	130
Zone Type	0951	255
Option 1	0947	080
Option 2	0948	000
Word 1		Word 3
Word 2		Word 4

Zone 21

Input	Transmitter 12	Serial #:
Option	Location	Default	New Value
Device	1284	005
Loop	1281	130
Zone Type	0967	255
Option 1	0963	080
Option 2	0964	000
Word 1		Word 3
Word 2		Word 4

Zone 22

Input	Transmitter 13	Serial #:
Option	Location	Default	New Value
Device	1296	005
Loop	1293	130
Zone Type	0983	255
Option 1	0979	080
Option 2	0980	000
Word 1		Word 3
Word 2		Word 4

Zone 23

Input	Transmitter 14	Serial #:
Option	Location	Default	New Value
Device	1308	005
Loop	1305	130
Zone Type	0999	255
Option 1	0995	080
Option 2	0996	000
Word 1		Word 3
Word 2		Word 4

Zones 24 - 25: Portable Transmitters

To program a portable transmitter's serial number, enter 9940 in program mode. The system will prompt "Enter Zone." Enter the zone number (24). The panel will repeat the zone number and prompt "Enter Seven." Enter the seven digit serial number that appears on the bar code of the transmitter (Ignore the leading letter). The panel will prompt for the next zone. Enter the next transmitter zone number or "H" to exit.

Both of the portable transmitters are defaulted as 5804s. To use a different portable transmitter, choose the device from the list on the next page and place the appropriate value in the Device location.

Each of functions that can be programmed to a button are listed in the Button Function table. Program the appropriate button with the button function value. For a description of how each button function operates see "Button Functions" in the Glossary at the end of this manual. If a transmitter has less than 4 buttons enter 255 in the additional button function locations.

Option 1 value 016 (report to central station) is the only Zone Option that applies to zones 24 - 25. To prevent portable transmitter activations from reporting to the central station, enter 000 in the option 1 location.

24