Apex Digital K1106 installation instructions Glossary of Terms

Page 41

Glossary of Terms

Access code before arm: In this configuration, a full access code (arm/disarm code) must be entered to arm the system. Once armed, the system must be disarmed to allow a change from one arming mode to another.

Alarm cut off and reset:

The system provides for an automatic reset (cut off high volume tones and system reset)

 

in the range of 1 to 255 minutes.

Answer service override: For installations that use answering services provided by the phone company. Two

 

separate calls must be made to the system for the panel to answer. On the first call, let

 

the phone ring twice and hang up. Call a second time, and the panel will answer on the

 

first ring and respond with an access confirmation tone.

 

NOTE: For remote phone access to work correctly, the panel must be wired for full

 

phone line seizure using an RJ-31X connection.

 

After the system confirmation tone, enter a valid disarm code that is programmed for

 

remote phone access within 15 seconds. The system will respond with system status.

 

Remote phone access operates in the same manner as local phone access, however, all

 

arming state changes are echoed over the inside house speakers. During remote phone

 

access, local phone access is unavailable and all local phones will receive a system

 

beep every second signifying remote phone access is active.

 

NOTE: Some electronic phone systems use the * and # keys for additional functions. It

 

may be required that the * and # are pressed twice for the system to generate the * or #

 

tone.

Answer service time:

This option is active only when Answer Service Override is enabled. This value

 

determines the amount of time the panel will wait for a second call after hearing two

 

rings on the first call.

Answering Machine

If an answering machine is used on the same phone line as the control panel, the

Override Digit:

answering machine override feature in the panel must be used. Once the answering

 

machine answers the line, enter the override digit. The system will respond with an

 

access confirmation tone.

Auto. EML/LTM clear:

All selected alerts that are sent to Event Memory Log and Long Term Memory are cleared

 

every 96 hours.

Automatic force arm:

Without this option enabled, if a user attempts to arm the system with a zone open, the

 

system will respond with "ZONES OPEN". The user can then "force arm" around the

 

open zone. This temporarily bypasses the zone until the zone is closed. If this option is

 

enabled, the open zone will automatically be temporarily bypassed (force armed) on the

 

first key press. The user is never notified that zones are open unless system status is

 

requested. Automatic force arm is not permitted in a UL installation.

Battery trouble:

If the backup battery is under 10 volts, low battery can be displayed at the keypad and /

 

or sent to the central station. This option must be enabled in a UL installation.

Burg tone before speech:

The length of time the system will create a burglary tone before speech.

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Destiny Page Page Panel Software Revision History Software RevisionsTable of Contents Specifications Page Items Included With the Control Panel Mounting the Control Board Inserting the Cabinet LockSmoke Power Trigger to output Wiring DiagramWiring Notes System Terminals Action Power LED Wiring an Input Using No End-of-Line Resistors Wiring an Input Using an End-of-Line ResistorWiring an Input Using 2 End-of-Line Resistor Supervision Locations and Values Programming Program ModeExiting Program Mode WHT Quick StartControl Board Loop Using This ManualSystem Setup Zone Options Programming ZonesThese Options are Common to Each Zone Section Zone Type Control Board Loop Zones 1 8 System ControllerZones 10 23 Alarm Type Transmitters Zone 9 System Controller Two-Wire Smoke Loop128 Zones 24 25 Portable Transmitters Zones 18 23 Alarm Type Transmitters5801 5804 Zone 28 Remote Phone / Phone Line Monitor Zone 26 System KeypadsZone 27 Local Phone User Code + Digit Functions System Access CodesZone 29 Monitor Trouble Conditions Assigning Words to Zones Automated Programming LocationsWord Location VocabularyUser Code Options System Times And Other OptionsSystem Options Group Extended Monitor Zone Type Assignment Monitor Trouble ConditionsBypass Options System Triggers Option Enter Total Value Activation Action System Triggers OptionAutomated Event Memory Log Upload Automatic Communicator TestingReporting Format Fail To Open Disarm / Fail to Close ArmAutomatic Arming and Disarming Two-Way Voice Options Ademco Contact ID Report Codes Report Codes Dialer OptionsReport Type Location Value Open Disarm Glossary of Terms With keypads and phone Following are system operation notes relative to bypass Status messages at the keypad Arming reports to the central station A UL installation Speaker Applications Single digit hexadecimal activation type Set Time and Date Dial Station Armed Spoken, but also the description of the zone that caused it Page Page Federal Communications Commission FCC Part 15 Statement Installation Layout Limitations of this Alarm System Ademco Limited Warranty

K1106 specifications

The Apex Digital K1106 is a versatile and compact multimedia player that has gained recognition for its user-friendly interface and impressive range of features. Designed to cater to the needs of modern consumers, the K1106 seamlessly blends function with style, making it an appealing choice for entertainment enthusiasts.

One of the standout features of the Apex Digital K1106 is its support for multiple media formats. Users can enjoy a variety of audio and video files, including popular formats such as MP3, WMA, AVI, and MKV, ensuring compatibility with a wide range of content. This flexibility allows users to play their favorite movies, music, and photos without the hassle of converting files, making it an all-in-one solution for home entertainment.

The K1106 also integrates advanced connectivity options, including HDMI, USB, and composite outputs. The HDMI output delivers high-definition video and audio, creating an immersive viewing experience when connected to HDTVs or projectors. Additionally, the USB port allows users to connect flash drives or external hard drives, making it easy to access a library of multimedia content. The composite output ensures compatibility with older television models, widening its usability across various devices.

Another key characteristic of the Apex Digital K1106 is its user-friendly interface. With an intuitive remote control and on-screen menu, navigating through various options and settings is straightforward, promoting an enjoyable user experience. The compact design of the device is also noteworthy, allowing it to fit seamlessly into any entertainment setup without taking up excessive space.

The device offers various playback features, such as pause, resume, and chapter selection, giving users the flexibility to enjoy their media at their own pace. Moreover, the K1106 supports subtitle files, enhancing the viewing experience for international content or dialogue-heavy films.

In summary, the Apex Digital K1106 is a multifaceted multimedia player that stands out for its broad format compatibility, advanced connectivity options, user-friendly interface, and playback features. Whether for watching movies, listening to music, or viewing photos, this device meets the diverse entertainment needs of its users while maintaining a sleek and compact design. Its combination of technology and practicality makes it a valuable addition to any home entertainment system, appealing to both casual viewers and avid media lovers alike.
Top Page Image Contents