Craftsman pmn Assembly of Tenon Push Block, Mounting Push Block Assembly on Back Fence

Page 14

Router Table for the Craftsman

L.Assembly of Tenon Push Block

1.Identify the components required, see opposite.

2.Screw the smaller threaded end of the Clamp Rod into threaded hole in Clamp Plate until the plate bottoms on it’s shoulder (make sure clamp is oriented such that letter 'C' is facing outwards as shown in fig. L.1) and tightly secure Clamp Plate to Clamp Rod with a 11mm AF spanner.

3.Insert the longer threaded end of Clamp Rod through hole in Push Block and fit the flat washer and the Wing Nut onto it.

Hex

Spring washer

 

nut

 

 

Small threaded end

 

 

 

 

Shoulder

 

 

 

 

Long threaded end

 

 

Clamp

Flat

Clamp

washer

 

plate

rod

 

 

 

 

 

 

Push block

Wing

 

 

nut

 

 

 

Fig. L.1

Mounting Push Block Assembly on Back Fence

1.Mount assembled Push Block on the Back Fence by aligning retaining rib on Push Block with the groove in the face of Back Fence. See fig. L.2.

2.Slide push block assembly back and forth along entire length of Back Fence to ensure that it slides freely. Occasional application of furniture spray wax on the sliding surfaces of the Push Block will improve the sliding motion.

Removing dust and chips from sliding surfaces of Push Block and Back Fence will ensure a good sliding motion.

M.Assembly of Safety Dust Guard to Back Fence

1.Identify the components required, see opposite.

2.Position the guard on the Back Fence as shown in fig. M.

3.Fit one of the Push Nuts onto one end of the Pivot Pin. (To ensure a secure fitting it will be necessary to tap it onto the pin with a hammer).

4.Align the holes in the Back Fence with those on the Dust Guard.

5.Insert the Pivot Pin through the holes.

6.Fit the remaining Push Nut onto the other end of the Pivot Pin. It will be necessary to support the other end of the Pivot Pin onto the corner of a hard surface in order to tap the Push Nut securely onto the Pivot Pin with a hammer.

7.Ensure the guard pivots freely.

Note

Once the guard has been installed, it is recommended that the Push Nuts are not removed.

Clamp

plate

Face of

back fence

Push block

Fig. L.2

Fig. M

-13-

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Trend R Routing Products from the UK Leader Router Table for the Craftsman Safety Precautions Table Leg NutsDome Headed Mounting Table to a Workmate Assembly of LegsMounting Table to Workbench or Workboard Fixing Pack Router Models Holes Fixings Identification of Mounting Holes and Screws Re-drilling of Router BaseRe-drilling of Insert Plate Re-drilling both Insert Plate and Router BaseFitting Insert Plate to Table Surface Fitting Router to Insert PlateFitting Insert Plate Rings Selecting & Fitting Insert Plate RingsSelecting the correct size of Ring Fitting Lead-on PinWing Nut x Clamp Rod xSpring Washer Nut x Clamp Plate x Push Block xAssembly of Safety Dust Guard to Back Fence Assembly of Tenon Push BlockMounting Push Block Assembly on Back Fence Back Fence Components Back Fence xAssembly of Back Fence Attachment of Back Fence to TableMitre Fence Components Assembly of Mitre Fence Alignment of Back Fence to Mitre Fence SlotAssembly of Hose Adaptor Dust Extraction EquipmentRemove Back Fence from Table Surface Assembly of Spring Pressure ClampsAdjustment Assembly of Profiling Top Guard Adjustment Fit Plate, Washer and Wing NutLock Back Fence Fixing Bolts Edging and Profiling using the Back FenceRelease Back Fence Fixing Bolts Using Router Table for Grooving Using Mitre FenceCraft Range Cutter Ref. C116 Special Notes Using The Profiling Top GuardProducing a Shield Moulding the Shield Definition of SnatchingEnd Cutting with the Tenon Push Block Fig. Z.1To socket for plug of router To plug at mains supply Profiling Top GuardFront of CRT Table 59mm Holes for M5 M/C screws 37mm 40mm 54mm 44mm 59.25mm Front Material Approx mm Material MIN .2mm 1/8 Thick

pmn specifications

The Craftsman PMN, or Portable Multi-Tool Navigator, represents a significant evolution in handheld tools, designed to meet the diverse needs of both DIY enthusiasts and professionals alike. This compact device integrates several functionalities, making it an all-in-one solution for a variety of projects, from simple repairs to complex constructions.

One of the standout features of the Craftsman PMN is its ergonomic design. Weighing in at just a few pounds, it offers a comfortable grip, allowing users to handle it for extended periods without experiencing fatigue. The integrated rubberized handle provides extra traction, which increases safety when operating the tool in challenging environments.

Technologically, the Craftsman PMN boasts an innovative power management system. This system cleverly optimizes the energy output based on the selected mode, whether it’s drilling, sanding, or cutting. Coupled with a brushless motor, this technology enhances battery life and reduces noise, allowing for quieter operation without sacrificing performance.

The versatility of the Craftsman PMN is another key characteristic. It features an interchangeable head system that can quickly switch between various attachments. From drill bits and saw blades to sanding discs, users have the flexibility to execute numerous tasks efficiently. The quick-release mechanism simplifies changing attachments, making the transition seamless even in the midst of a project.

Moreover, the Craftsman PMN comes equipped with a built-in LED work light. This feature illuminates dark or hard-to-reach areas, making it an ideal tool for work in poorly lit spaces, such as attics, basements, or outdoors after sunset. Users can enjoy increased visibility, which contributes to precision and safety during operations.

In terms of durability, the Craftsman PMN is constructed with high-quality materials designed to withstand the rigors of professional use. Resistant to dust and moisture, this tool can perform reliably across various environmental conditions, making it a robust option for construction sites or home improvement tasks.

Ultimately, the Craftsman PMN embodies the evolution of multi-tool technology, offering an array of features that cater to the modern user's demands. Combining ergonomic design, advanced technology, versatility, effective lighting, and robust construction, it has established itself as a go-to investment for anyone looking to enhance their toolkit.
Top Page Image Contents