Craftsman pmn Assembly of Profiling Top Guard Adjustment, Fit Plate, Washer and Wing Nut

Page 21

Router Table for the Craftsman

U.

Assembly of Profiling Top Guard

Adjustment

The use of the optional accessory, Profiling Top Guard is highly recommended to safely carry out the profiling of workpieces with a bearing guided cutter. It will prevent the operator's fingers inadvertantly contacting the cutter.

1.Fit the Bolt, Star Washer, Spring Washer and Nut in the sequence as indicated below.

2.Tighten nut securely with a 8mm spanner.

3.Fit Plate, Washer and Wing Nut.

4.Slide the Perspex Guard in between the Plate and edge of Table Surface.

5.Gently tighten Wing Nuts.

1.The height of the Perspex Guard should be adjusted to leave a 6mm to 12mm gap between the top of the workpiece and the underside of the guard. This will prevent fingers coming into contact with the cutter.

2.To adjust the height undo the wing nuts, re-position the guard and retighten.

Section Y describes a typical application involving the use of bearing guided cutters with the Router Table.

Profiling Top Guard - CRT/2

Perspex Guard

M5 Bolt

Star Washer

Spring Washer

Half Nut

Plate

Washer

Wing Nut

fig. T

-20-

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Trend R Routing Products from the UK Leader Router Table for the Craftsman Safety Precautions Nuts Dome HeadedTable Leg Assembly of Legs Mounting Table to Workbench or WorkboardMounting Table to a Workmate Fixing Pack Router Models Holes Fixings Re-drilling of Router Base Identification of Mounting Holes and ScrewsRe-drilling both Insert Plate and Router Base Re-drilling of Insert PlateFitting Router to Insert Plate Fitting Insert Plate to Table SurfaceSelecting the correct size of Ring Selecting & Fitting Insert Plate RingsFitting Insert Plate Rings Fitting Lead-on PinSpring Washer Nut x Clamp Rod xWing Nut x Clamp Plate x Push Block xAssembly of Tenon Push Block Mounting Push Block Assembly on Back FenceAssembly of Safety Dust Guard to Back Fence Back Fence x Back Fence ComponentsAttachment of Back Fence to Table Assembly of Back FenceMitre Fence Components Alignment of Back Fence to Mitre Fence Slot Assembly of Mitre FenceDust Extraction Equipment Assembly of Hose AdaptorAssembly of Spring Pressure Clamps AdjustmentRemove Back Fence from Table Surface Fit Plate, Washer and Wing Nut Assembly of Profiling Top Guard AdjustmentEdging and Profiling using the Back Fence Release Back Fence Fixing BoltsLock Back Fence Fixing Bolts Using Mitre Fence Using Router Table for GroovingCraft Range Cutter Ref. C116 Using The Profiling Top Guard Producing a ShieldSpecial Notes Definition of Snatching Moulding the ShieldFig. Z.1 End Cutting with the Tenon Push BlockTo socket for plug of router To plug at mains supply Guard Profiling TopFront of CRT Table 59mm Holes for M5 M/C screws 37mm 40mm 54mm 44mm 59.25mm Front Material Approx mm Material MIN .2mm 1/8 Thick

pmn specifications

The Craftsman PMN, or Portable Multi-Tool Navigator, represents a significant evolution in handheld tools, designed to meet the diverse needs of both DIY enthusiasts and professionals alike. This compact device integrates several functionalities, making it an all-in-one solution for a variety of projects, from simple repairs to complex constructions.

One of the standout features of the Craftsman PMN is its ergonomic design. Weighing in at just a few pounds, it offers a comfortable grip, allowing users to handle it for extended periods without experiencing fatigue. The integrated rubberized handle provides extra traction, which increases safety when operating the tool in challenging environments.

Technologically, the Craftsman PMN boasts an innovative power management system. This system cleverly optimizes the energy output based on the selected mode, whether it’s drilling, sanding, or cutting. Coupled with a brushless motor, this technology enhances battery life and reduces noise, allowing for quieter operation without sacrificing performance.

The versatility of the Craftsman PMN is another key characteristic. It features an interchangeable head system that can quickly switch between various attachments. From drill bits and saw blades to sanding discs, users have the flexibility to execute numerous tasks efficiently. The quick-release mechanism simplifies changing attachments, making the transition seamless even in the midst of a project.

Moreover, the Craftsman PMN comes equipped with a built-in LED work light. This feature illuminates dark or hard-to-reach areas, making it an ideal tool for work in poorly lit spaces, such as attics, basements, or outdoors after sunset. Users can enjoy increased visibility, which contributes to precision and safety during operations.

In terms of durability, the Craftsman PMN is constructed with high-quality materials designed to withstand the rigors of professional use. Resistant to dust and moisture, this tool can perform reliably across various environmental conditions, making it a robust option for construction sites or home improvement tasks.

Ultimately, the Craftsman PMN embodies the evolution of multi-tool technology, offering an array of features that cater to the modern user's demands. Combining ergonomic design, advanced technology, versatility, effective lighting, and robust construction, it has established itself as a go-to investment for anyone looking to enhance their toolkit.
Top Page Image Contents