Craftsman pmn Assembly of Mitre Fence, Alignment of Back Fence to Mitre Fence Slot

Page 18

Router Table for the Craftsman

Q.Assembly of Mitre Fence

1.Identify the components required, see opposite.

2.Insert the pin of the Mitre Fence Head into the Mitre Bar.

3.Insert the Securing Bolt and fit the Flat Washer and Securing Knob (small size).

4.Remove any flash on the plastic pointer with a sharp knife.

5.Position the pointer as shown in fig. Q.1 and insert the bolt, then fit the nut.

Alignment of Back Fence to Mitre Fence Slot

1.Measure the distance from each end of Back Fence to edge of Mitre Fence slot in the Table Surface as shown in fig. Q.2. Adjust the position of the Back Fence to ensure both distances are equal.

2.Position Mitre Gauge in slot as shown in fig. Q.2.

R.No-Volt Release Switch - NVRS/230V (Standard accessory on tables made from 1/3/97)

The No-volt Release Switch can be fitted to the table leg or workboard to provide easy access to On/Off buttons. Should the power be turned off at source, the router will not restart until the green start button is pressed. The switch is for use with 230 volt routers up to 1850 watts.

1.With the fixing kit supplied, mount the No Volt Release Switch on the right side of the router table using the holes already drilled.

Knob

Flat washer

 

Mitre fence head

 

 

Knob

Mitre bar

Pointer

 

Securing bolt

Hex nut

 

fig. Q.1

fig. Q.2

to plug at

mains supply

to socket for

plug of router

fig. U.1

workboard

fig. U.2

-17-

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Trend R Routing Products from the UK Leader Router Table for the Craftsman Safety Precautions Nuts Dome HeadedTable Leg Assembly of Legs Mounting Table to Workbench or WorkboardMounting Table to a Workmate Fixing Pack Router Models Holes Fixings Identification of Mounting Holes and Screws Re-drilling of Router BaseRe-drilling of Insert Plate Re-drilling both Insert Plate and Router BaseFitting Insert Plate to Table Surface Fitting Router to Insert PlateFitting Insert Plate Rings Selecting & Fitting Insert Plate RingsSelecting the correct size of Ring Fitting Lead-on PinWing Nut x Clamp Rod xSpring Washer Nut x Clamp Plate x Push Block xAssembly of Tenon Push Block Mounting Push Block Assembly on Back FenceAssembly of Safety Dust Guard to Back Fence Back Fence Components Back Fence xAssembly of Back Fence Attachment of Back Fence to TableMitre Fence Components Assembly of Mitre Fence Alignment of Back Fence to Mitre Fence SlotAssembly of Hose Adaptor Dust Extraction EquipmentAssembly of Spring Pressure Clamps AdjustmentRemove Back Fence from Table Surface Assembly of Profiling Top Guard Adjustment Fit Plate, Washer and Wing NutEdging and Profiling using the Back Fence Release Back Fence Fixing BoltsLock Back Fence Fixing Bolts Using Router Table for Grooving Using Mitre FenceCraft Range Cutter Ref. C116 Using The Profiling Top Guard Producing a ShieldSpecial Notes Moulding the Shield Definition of SnatchingEnd Cutting with the Tenon Push Block Fig. Z.1To socket for plug of router To plug at mains supply Profiling Top GuardFront of CRT Table 59mm Holes for M5 M/C screws 37mm 40mm 54mm 44mm 59.25mm Front Material Approx mm Material MIN .2mm 1/8 Thick

pmn specifications

The Craftsman PMN, or Portable Multi-Tool Navigator, represents a significant evolution in handheld tools, designed to meet the diverse needs of both DIY enthusiasts and professionals alike. This compact device integrates several functionalities, making it an all-in-one solution for a variety of projects, from simple repairs to complex constructions.

One of the standout features of the Craftsman PMN is its ergonomic design. Weighing in at just a few pounds, it offers a comfortable grip, allowing users to handle it for extended periods without experiencing fatigue. The integrated rubberized handle provides extra traction, which increases safety when operating the tool in challenging environments.

Technologically, the Craftsman PMN boasts an innovative power management system. This system cleverly optimizes the energy output based on the selected mode, whether it’s drilling, sanding, or cutting. Coupled with a brushless motor, this technology enhances battery life and reduces noise, allowing for quieter operation without sacrificing performance.

The versatility of the Craftsman PMN is another key characteristic. It features an interchangeable head system that can quickly switch between various attachments. From drill bits and saw blades to sanding discs, users have the flexibility to execute numerous tasks efficiently. The quick-release mechanism simplifies changing attachments, making the transition seamless even in the midst of a project.

Moreover, the Craftsman PMN comes equipped with a built-in LED work light. This feature illuminates dark or hard-to-reach areas, making it an ideal tool for work in poorly lit spaces, such as attics, basements, or outdoors after sunset. Users can enjoy increased visibility, which contributes to precision and safety during operations.

In terms of durability, the Craftsman PMN is constructed with high-quality materials designed to withstand the rigors of professional use. Resistant to dust and moisture, this tool can perform reliably across various environmental conditions, making it a robust option for construction sites or home improvement tasks.

Ultimately, the Craftsman PMN embodies the evolution of multi-tool technology, offering an array of features that cater to the modern user's demands. Combining ergonomic design, advanced technology, versatility, effective lighting, and robust construction, it has established itself as a go-to investment for anyone looking to enhance their toolkit.
Top Page Image Contents