Safer, better results when raising panels!
Stock No. 40-025
Developed with expert input from Lonnie Bird!
Panel-Locwas developed in conjunction with acclaimed woodworker Lonnie Bird,
pictured above in his woodshop. The unique design of Panel-Locplaces downward pressure on your workpiece at just the right place — 2" away from the fence. This prevents the tipping that occurs with ordinary featherboards. Panel-Localso provides excellent protection from accidental contact with the router bit, and its long surface area protects you from flying chips and dust. Panel-Locincludes a 20" length of our T-Loc accessory track for mounting to most available fences. Fits ALL Bench Dog Tools router tables.
U.S. Patent No. 6,481,472
➤ | Protects your hands from large bits! | Mounting T-Loc to your fence makes installing Panel-Loc simple and tool-free. |
|
➤Fits ALL Bench Dog Tools router tables and fences, as well as most other router table fences.
➤Holds your panel down firmly for better cuts and completely eliminates unwanted lifting.
➤Low-friction, UHMW hold-down strip allows your panel to move freely and is non-marring.
➤For all horizontal raised panel bits.
router table accessories
Stock No. 10-013
T-Locis a horizontal 1/4" accessory T-track. The T-slot captures 1/4" hex-head bolts used on
many aftermarket accessories. Use T-Locto add a
T-slot to your shop-made fences and jigs. T-Lochas many other uses too, such as a guide, holding stops, or other fixtures. T-Locis the best way to attach our Feather-Locfeatherboards and other Bench Dog Tools accessories to your shop-made fence. T-Loccan also be mounted to many other brands of router table fences. T-Locmay also be an effective way to add a horizontal T-track to your table saw’s rip fence. Comes in 36" lengths. May be cut to size. Mounting will require drilling holes and obtaining proper hardware.
T-Loc mounted to a simple shop-made fence. Installation is easy — just screw it on.
Mounting to aftermarket fences | Mounting to a shop-made or scrap |
(like Fasttrack or Woodhaven). | wood fence. |
Give your ProFence a boost in height and performance!
With ProRiser, you can extend
the height of your fence to
Stock No. 40-013whatever dimension you like! Just slide the ProRiser brackets
into the rear T-slot of your Profence and add a piece of 3/4" thick stock. The stock can be very wide for maximum support, or it can be a specific width to allow surface moldings to slide through un-obstructed. Includes all necessary hardware; you just add the fence face.
➤Maximum support for routing boards on edge and for raising panels vertically.
➤Holds material perfectly square to the table — ideal for precise joinery.
➤Works with ANY Bench Dog Tools router table.
benchdog.com | ©Copyright Bench Dog Tools, Inc. 2008 | Toll Free 800-786-8902 | page 19 |
