accessories
Stock No.
A must-have accessory for your table saw!
➤Protect your hands from serious injury.
➤No more chipped or bent blades.
➤Fits all 10" table saws.
➤ Replaces the scrap wood and
THREE SIMPLE STEPS! Setup is fast and easy!
Place | Remove your old blade from | Place |
and loosen the nut. | the table saw. | blade and tighten. |
U.S. Patent No. 5,983,480
Available in
saw
Safer cuts.
Better cuts.
Stock No.
See page 17 for Tandem and Double Feather-Loc!
table
➤Holds stock against the rip fence for better safety and accuracy.
➤Produces smooth,
➤Reduces kickback, binding and bent blades.
➤Can be flipped to work on either side of the fence.
➤Fits standard miter gauge slots (3/4" wide by 3/8" deep)
found in most table saws, band saws, router tables and shapers.
Patent Pending
Available in 4 packs. Stock No.
benchdog.com | © Copyright Bench Dog Tools, Inc. 2008 |
Toll Free | page 3 |