Bench Dog Tools Acrylic ProPlate manual Saw accessories, Get your hands out of harms way

Get your hands out of harm's way!

Exclusive offset handle keeps your hand out of harm’s way

Stock No. 10-025

Ergonomic “no-slip” grip.

saw accessories

A push stick isn’t much good if you can’t find it! That’s why
we designed our revolutionary Push-Locwith a dedicated
docking station that keeps Push-Locupright and ready
for use. No more fumbling with the push stick in the
middle of a cut — just reach out and grab it! The docking
station is also a handy pencil tray, and it even houses up
to two tape measures. Another goal was to make our
push stick safer, less likely to hinder visibility, and less
likely to get caught on the blade guard. Furthermore, it	Holster your tape
had to work on router tables and jointers. Push-Loc’s	measure here
	and never lose
patented offset handle accomplishes all these goals. It
	sight of it again.
gets your hands out of harm’s way, improves line-of-sight
visibility, and allows your hand to easily clear the blade
guard. On router tables, the offset works by preventing
your hand from scraping the table top.
➤ Ergonomic “no-slip” grip for comfort and safety.
➤ Special handle geometry keeps Push-Loc
parallel to the fence throughout the entire cut.

➤Rear tail hook holds tight, but is still compatible with thinner material.

		Docking station
➤	Rubber sole helps prevent slippage and won’t	includes a handy
		pencil tray.
	mar your workpiece.

Special handle geometry keeps Push-Loc parallel to your table saw’s rip fence throughout the entire cut.

Tail hook grips your stock.

Patent Pending

Push-Loc’s exclusive offset handle keeps your right hand out of the way for better visibility. Safety is also improved, by keeping your hand further from the blade. With features like these, Push- Loc outperforms any other push stick on the market.

table

Stop busting your knuckles on the blade guard! Push- Loc’s offset handle clears the guard, and lets you see what you are doing. A must- have accessory for every table saw!

Push-Loc’s offset handle keeps your hand from scraping the table top in router table applications. The docking station helps control all those small parts and tools, too!

Docking station mounts almost anywhere!

Mounting the docking station to your fence puts Push-Loc right where you need it! Attach with screws or double-sided tape.

The docking station includes two mounting holes for attaching to a Bench Dog router table fence.

Available in 5 packs.

Stock No. 10-026

benchdog.com ©Copyright Bench Dog Tools, Inc. 2008 Toll Free 800-786-8902 page 5