Bench Dog Tools Aluminum ProPlates manual Installing door or window trim? You need Trim-Loc

Installing door or window trim?

You need Trim-Loc!

Stock No. 10-016

➤Get consistent casement reveals for a professional look.

➤Increase speed and efficiency.

➤Measure inside-to-inside miters quickly and accurately.

➤Reduce waste and costly splits.

➤Use as a handy combination square.

➤Ergonomic design, easy-to-use and durable.

Finger holes for easy handling

45°	90°	Measuring wide openings by yourself is easy! Tack
		Trim-Loc in place with two 6d finish nails and slip
		your tape in the slot!

job site tools

Tape measure hook slots

6d tack holes.

Starter nail guide helps prevent splits.

Workbench mounting holes.

Trim-Locis the only tool on the market used to measure, mark

and install casement trim. With this handy, lightweight tool in your belt, trimwork will go like clockwork. Trim-Loc’sbuilt-in tape measure hook slots and

preset reveal allow you to accurately measure all of your trim pieces at once, saving you hours of time. After you measure and record the trim lengths, use Trim-Locto accurately transfer the measurements to your trim stock and mark cut lines. Finally, use Trim-Locto hold the trim pieces in perfect alignment while you nail them in place. Trim-Locholds the trim fast, preventing the nail gun from throwing it out of alignment. Use the starter nail guide to help prevent costly splits and wasted material.

For better convenience and efficiency, purchase two Trim-Locs: one for your tool belt and one for mounting to your bench — a must for carpentry crews and large trim jobs. Trim-Lochas many other uses, too. For example, use Trim-Loc’sprecise 45° and 90° guides to mark cut lines, square jambs and true power tools. Trim-Locis a perfect companion for your miter saw because it’s easy to hold and doesn’t get in the way. Once you see how handy Trim-Locis, we’re sure it will become your tool belt favorite!

MEASURE

Tape measure hook slots make measuring all those difficult inside-to-inside miters easy. Measure, mark, cut and install all the trim pieces at once. No more tedious trial and error!

MARK AND CUT

Trim-Loc will quickly become your tool of choice for marking 45° and 90° cuts and 3/16" reveals for trim. Also makes a handy square for checking your angles.

INSTALL

Positions and holds trim while you nail it. Get perfect alignment, tight-fitting miter joints and consistent reveals every time!

Measure, mark, position, nail — Trim-Loc makes it easy to get sharp results!

Measuring wide openings	Accurately mark 3/16"	Trim-Loc is the perfect
by yourself is easy!	reveals around window	tool for setting up and
	and door jambs	truing saw blades, jambs
		and trim.

How do you measure inside-	Notch allows you to align	Available in 5-packs
to-inside miters? Simple.	Trim-Loc with outside of
Fasten Trim-Loc to your	trim and extend your line	Stock No. 10-017
bench for an easy-to-use jig.	to the baseboard.

benchdog.com ©Copyright Bench Dog Tools, Inc. 2008 Toll Free 800-786-8902 page 6