Cisco Systems AIRCAP3502EAK9 specifications Unpacking, 20A. Statement

Warning	This product relies on the building’s installation for short-circuit (overcurrent)
	protection. Ensure that the protective device is rated not greater than:
	20A. Statement 1005
Warning	Do not operate your wireless network device near unshielded blasting caps or in an
	explosive environment unless the device has been modified to be especially qualified for
	such use. Statement 245B
Caution	The fasteners you use to mount an access point on a ceiling must be capable of
	maintaining a minimum pullout force of 20 lbs (9 kg) and must use all 4 indented holes
	on the mounting bracket.
Caution	This product and all interconnected equipment must be installed indoors within the same
	building, including the associated LAN connections as defined by Environment A of the
	IEEE 802.af Standard.

Note The access point is suitable for use in environmental air space in accordance with section 300.22.C of the National Electrical Code and sections 2-128, 12-010(3), and 12-100 of the Canadian Electrical Code, Part 1, C22.1. You should not install the power supply or power injector in air handling spaces.

Note Use only with listed ITE equipment.

3Unpacking

Follow these steps:

Step 1 Unpack and remove the access point and the accessory kit from the shipping box.

Step 2 Return any packing material to the shipping container and save it for future use.

3