Cisco Systems AIRCAP3702IAK9 This Device Meets FCC Guidelines for Exposure to Radio Waves

Page 34

As such the systems are designed to be operated as to avoid contact with the antennas by the end user. It is recommended to set the system in a location where the antennas can remain at least a minimum distance as specified from the user in accordance to the regulatory guidelines which are designed to reduce the overall exposure of the user or operator.

Separation Distance

MPE

Distance

Limit

 

 

 

0.63 mW/cm2

20 cm (7.87 inches)

1.00 mW/cm2

The World Health Organization has stated that present scientific information does not indicate the need for any special precautions for the use of wireless devices. They recommend that if you are interested in further reducing your exposure then you can easily do so by reorienting antennas away from the user or placing he antennas at a greater separation distance then recommended.

This Device Meets FCC Guidelines for Exposure to Radio Waves

The 3700 series device includes a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) as referenced in FCC Part 1.1310. The guidelines are based on IEEE ANSI C 95.1 (92) and include a substantial safety margin designed to ensure the safety of all persons, regardless of age and health.

As such the systems are designed to be operated as to avoid contact with the antennas by the end user. It is recommended to set the system in a location where the antennas can remain at least a minimum distance as specified from the user in accordance to the regulatory guidelines which are designed to reduce the overall exposure of the user or operator.

The device has been tested and found compliant with the applicable regulations as part of the radio certification process.

Separation Distance

MPE

Distance

Limit

 

 

 

0.63 mW/cm2

20 cm (7.87 inches)

1.00 mW/cm2

The US Food and Drug Administration has stated that present scientific information does not indicate the need for any special precautions for the use of wireless devices. The FCC recommends that if you are interested in further reducing your exposure then you can easily do so by reorienting antennas away from the user or placing the antennas at a greater separation distance then recommended or lowering the transmitter power output.

Image 34
Contents Cisco Aironet 3700 Series Access Points Created November, 2013 Introduction to the Access Point About this GuideSafety Instructions Important Safety Instructions20A. Statement Unpacking ConfigurationsExternal Antennas Regulatory Domains Internal AntennasCountries Supported Access Point Ports and Connectors Access Point Ports and Connections top-3702E ModelAccess Point LED Indicator top-3702I Model Configuring the Access Point Controller Discovery ProcessPreparing the Access Point Installation Summary Performing a Pre-Installation ConfigurationPre-Installation Configuration Setup Controller Layer 3 devices Cisco Aironet access pointsPage Mounting the Access Point Deploying the Access Point on the Wireless NetworkInstalling Modules Installing a Module345379 345380 Using Dhcp Option TroubleshootingChecking the Access Point LED LED LED Troubleshooting the Access Point Join Process Show ap join stats detailed ap base radio MAC addressPage Declarations of Conformity and Regulatory Information Page Vcci Statement for Japan 03-6434-6500 Statement 371-Power Cable and AC Adapter Industry Canada Canadian Compliance StatementFrench Translation Access Point Models Page Page Declaration of Conformity for RF Exposure Generic Discussion on RF ExposureThis Device Meets FCC Guidelines for Exposure to Radio Waves Additional Information on RF Exposure Chinese Translation English Translation Operation of Cisco Aironet Access Points in Brazil Portuguese TranslationConfiguring Dhcp Option 43 and Dhcp Option Declaration of Conformity StatementsType + Length + Value Access Point Specifications Category SpecificationPage Page Cisco Systems, Inc