Chapter 4 Router Installation
Connecting a Broadband Modem
(Optional) To connect the router to an external Ethernet switch, follow these steps:
Step 1 Connect one end of the yellow Ethernet cable to a
Step 2 Connect the other end of the cable to an available port on the Ethernet switch to add an additional Ethernet connection.
Step 3 Turn on the Ethernet switch.
Connecting a Broadband Modem
This section applies only to the Cisco Secure Router 520
You can connect to the Internet by connecting the router to a broadband modem. Figure
Figure 4-6 Connecting to a Broadband Modem
Cisco Secure Router 500 Series
1
231442
1
2
Ethernet WAN port on the router | 2 | Available port on the modem |
|
|
|
To connect the router to an installed DSL, cable, or
Step 1 Connect one end of the yellow cable to the Ethernet WAN FE4 port.
Step 2 Connect the other end of the cable to an available port on the modem.
To determine which port on the modem to connect to, follow the instructions provided with your broadband modem.
Cisco Secure Router 520 Series Hardware Installation Guide
|
| |
|