Festool PAC574368 Changing the routing tool, Changing the clamping collet, Removing the tool

Page 10

10

b) Router table for edge veneer

The "router table for edge veneer" (only in SET scope of delivery) is designed for flush trim- ming veneer overhang and profile routing.

Notes:

fThe router table is tilted 1.5° so that the surface coating is not damaged during edge routing. A router table with 0° inclination angle for precise cuts is available as an accessory.

15-1

Removal is performed in reverse sequence to installation.

Changing the routing tool

Risk of accident - the routing tool may be hot after use and has sharp edges. Allow the tool to cool before chang-

ing. Wear protective gloves when changing tools.

–Remove the router table before changing the routing tool.

2 1

3

2

5-2

SW 19

6-1

6-2 6-3

a) Removing the tool

–Secure the sensor [5-1] to the machine using the preassembled screws. Slide the sensor in the long holes to adjust the rout- ing tool to the perfect position.

–Slide the router table onto the retaining pin [5-2] on the machine.

3

5-3

 

4

5-4

– Tighten the screw [5-3] to clamp the router

–Press the spindle lock [6-1].

–Unscrew the locking nut [6-2] using the open-end wrench (size 19) until you are able to remove the tool.

b) Inserting the tool

–Insert the routing tool [6-3] into the open clamping collet as far as possible, but at least up to the mark ( ) on the shank.

–Press the spindle lock [6-1].

–Tighten the locking nut [6-2] using the open-end wrench (size 19).

Changing the clamping collet

Only compatible tools can be used in com- bination with the clamping collets supplied. 8 mm, 6 mm and 1/4" (6.35 mm) clamping

table in position.

– Place the extraction hood [5-4] in posi-

tion.

5

5-5

collets can be used.

1

2

7-1

7-2

3

7-3

–Tighten the screw [5-5] to clamp the ex- traction hood in position.

–Press the spindle lock [7-1].

–Unscrew the locking nut [7-2] completely.

–Remove the locking nut from the spindle together with the clamping collet [7-3]. Do not separate the locking nut and clamping collet as these form a single component.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Guide d’utilisation Manual de instruccionesPage Page Page Page Table of contents Safety rulesSpecific Safety Rules Tool use and careFunctional description Technical dataSymbols Intended useChanging the router table Tool settingsSwitching the ma Chine on and off Electronic controlRouter table for edge veneer Changing the routing toolChanging the clamping collet Removing the toolDust extraction Adjusting the routing depthWorking with the machine Machine guidance methodsAluminium processing Service and maintenanceAccessories, tools SystainerConditions of 1+2 Warranty WarrantyFestool Limited Warranty Régles de sécu Rité générales Table des matièresRégles de sécurité Sécurité de aire de travailSécurité des personnes Utilisation et en- tretien des outilsCaractéristiques Techniques SymbolesEntretien et réparation Raccordement électrique Description functionnelleUtilisation conforme Aux prescriptions Câble de rallongeRéglages de la machine Remplacement de la ta Ble de fraisageSystème électronique Retrait de loutil Changement de pin Ce de serrageChangement de fraise Insertion de loutilAspiration Travail avec la machineRéglage de la profon Deur de fraisage Types de guida- ge de la machineUsinage de laluminium Maintenance et entretienAccessoires, outils Fraisage de chants avec roulement de guidageInitial seulement, que l’outil indiqué sera Page Seguridad eléctrica ContenidoNormas genera- les de seguridad Seguridad del es- pacio de trabajoUso y cuidado de la herramienta Seguridad personalMantenimiento Símbolos Normas de seguri Dad específicasDatos téchnicos Descripción de Las funciónesConexión eléctrica Uso conforme a Lo previstoAjustes de la máquina Dispositivo protector contra sobre-tem- peraturas Cambio de la mesa de fresarNúmero constante de revoluciones Mesa de fresar con gran superficie de apoyoAjuste de la profun Didad de fresado Cambio de la pin Za de sujeciónCambiar la fresadora Inserción de la herramientaTrabajo con la máquina AspiraciónTrabajar con aluminio Mantenimien- to y limpiezaTratamiento de cantos con cojinete de arrastre Condiciones de la Ga Rantía 1 + Accesorios, herramientasGarantía Garantía limitada de FestoolPage Page Page Page

574368, PI574368, PN574368, PAC574368 specifications

The Festool PAC574368, also known as PN574368 or PI574368, is designed for professionals who require precision and versatility in their woodworking and construction projects. This product is part of Festool's extensive line of high-quality tools and accessories, which are known for their durability, innovation, and performance.

One of the key features of the PAC574368 is its compatibility with Festool dust extraction systems. This ensures a clean working environment, reducing the amount of dust generated during cutting, sanding, or milling processes. The dust extraction not only protects the health of the user but also maintains the quality of the work area and the tools being used.

The PAC574368 is made from high-quality materials that ensure longevity and reliability. It is designed to withstand the rigors of daily use, making it a valuable asset for carpenters and contractors who rely on their tools to perform consistently. The robustness of the materials does not compromise the product’s lightweight design, making it easy to handle and maneuver during use.

Another notable characteristic of the PAC574368 is its finely tuned ergonomics. The design promotes comfort for the user, reducing fatigue during extended periods of work. The handle is positioned to allow for optimal control, which is essential for precision tasks. This ergonomic approach makes the tool accessible to a wide range of users, from seasoned professionals to those who are just starting in the field.

Festool's commitment to technology is evident in the PAC574368. The tool features advanced engineering that enhances its performance and efficiency. Moreover, it is designed for easy maintenance, with readily available replacement parts that ensure it can remain operational for many years.

In conclusion, the Festool PAC574368 stands out due to its compatibility with dust extraction systems, high-quality materials, ergonomic design, and advanced engineering. Whether for professional use or serious hobbyists, this tool is an excellent choice for anyone looking to achieve superior results in their woodworking projects. With Festool’s reputation for excellence backing it, users can trust that they are investing in a high-performing and reliable tool that will meet their needs.
Top Page Image Contents