Festool PN574368, PI574368 Technical data, Symbols, Functional description, Intended use

Page 8

8

Technical data

Power consumption

720 W

Rotational speed (no load)

10000 - 26000 rpm

Tool holder

8 mm (0.31")

optional:

6 mm (0.24")

 

1/4"(6.35 mm)

Max. routing tool diameter

26 mm (1")

Weight

1.9 kg (4.2 lbs)

Safety

/II

Symbols

V Volts

A Amperes

Hz Hertz

~Alternating current

n0

No load speed

 

Class II Construction

rpm

Revolutions or reciprocation per

 

minute

ØDiameter

Warning of general danger

Read the Operating Instructions/ Notes!

fAdvice or tip

Functional description

The pictures for the scope of delivery are on a fold-out page at the beginning of the instruc- tion manual. When reading of the manual you can fold out this page for having always an overview of the machine.

[1-1] MFK 700 with large surface router ta- ble

[1-2] Side stop with guide rods and fine ad- juster (accessory)

[1-3] Extraction hood for large surface router table with extractor connector

[1-4] Router table for edge veneer with feeler roller and extraction hood (only in SET scope of delivery)

Intended use

The MFK 700 EQ is designed for routing wood, plastic and similar materials.

The user shall be responsible and liable for damages and accidents resulting from misuse or abuse of this tool.

Electrical connection

The network voltage must conform to the voltage indicated on the rating plate. A 16 A safety fuse (for 120 V) or a corresponding protective circuit-breaker is required.

See the following figure [2] for connection and disconnection of the power cable.

Always switch the machine off before connecting or disconnecting the power cable!

2

Extension cable

If an extension cable is required, it must have a sufficient cross-section so as to prevent an excessive drop in voltage or overheating. An excessive drop in voltage reduces the output and can lead to failure of the motor. The table below shows you the correct cable diameter as a function of the cable length for the MFK 700. Use only U.L. and CSA listed extension cables. Never use two extension cables together. In- stead, use one long one.

Total Extension Cord

25

50

100

150

Lenght (feed)

 

 

 

 

Cord size (AWG)

18

16

16

14

Note:

fThe lower the AWG number, the stronger the cable.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Guide d’utilisation Manual de instruccionesPage Page Page Page Table of contents Safety rulesSpecific Safety Rules Tool use and careTechnical data SymbolsFunctional description Intended useTool settings Switching the ma Chine on and offChanging the router table Electronic controlChanging the routing tool Changing the clamping colletRouter table for edge veneer Removing the toolAdjusting the routing depth Working with the machineDust extraction Machine guidance methodsService and maintenance Accessories, toolsAluminium processing SystainerFestool Limited Warranty WarrantyConditions of 1+2 Warranty Table des matières Régles de sécuritéRégles de sécu Rité générales Sécurité de aire de travailSécurité des personnes Utilisation et en- tretien des outilsEntretien et réparation SymbolesCaractéristiques Techniques Description functionnelle Utilisation conforme Aux prescriptionsRaccordement électrique Câble de rallongeSystème électronique Remplacement de la ta Ble de fraisageRéglages de la machine Changement de pin Ce de serrage Changement de fraiseRetrait de loutil Insertion de loutilTravail avec la machine Réglage de la profon Deur de fraisageAspiration Types de guida- ge de la machineMaintenance et entretien Accessoires, outilsUsinage de laluminium Fraisage de chants avec roulement de guidageInitial seulement, que l’outil indiqué sera Page Contenido Normas genera- les de seguridadSeguridad eléctrica Seguridad del es- pacio de trabajoMantenimiento Seguridad personalUso y cuidado de la herramienta Normas de seguri Dad específicas Datos téchnicosSímbolos Descripción de Las funciónesAjustes de la máquina Uso conforme a Lo previstoConexión eléctrica Cambio de la mesa de fresar Número constante de revolucionesDispositivo protector contra sobre-tem- peraturas Mesa de fresar con gran superficie de apoyoCambio de la pin Za de sujeción Cambiar la fresadoraAjuste de la profun Didad de fresado Inserción de la herramientaTrabajo con la máquina AspiraciónTratamiento de cantos con cojinete de arrastre Mantenimien- to y limpiezaTrabajar con aluminio Accesorios, herramientas GarantíaCondiciones de la Ga Rantía 1 + Garantía limitada de FestoolPage Page Page Page

574368, PI574368, PN574368, PAC574368 specifications

The Festool PAC574368, also known as PN574368 or PI574368, is designed for professionals who require precision and versatility in their woodworking and construction projects. This product is part of Festool's extensive line of high-quality tools and accessories, which are known for their durability, innovation, and performance.

One of the key features of the PAC574368 is its compatibility with Festool dust extraction systems. This ensures a clean working environment, reducing the amount of dust generated during cutting, sanding, or milling processes. The dust extraction not only protects the health of the user but also maintains the quality of the work area and the tools being used.

The PAC574368 is made from high-quality materials that ensure longevity and reliability. It is designed to withstand the rigors of daily use, making it a valuable asset for carpenters and contractors who rely on their tools to perform consistently. The robustness of the materials does not compromise the product’s lightweight design, making it easy to handle and maneuver during use.

Another notable characteristic of the PAC574368 is its finely tuned ergonomics. The design promotes comfort for the user, reducing fatigue during extended periods of work. The handle is positioned to allow for optimal control, which is essential for precision tasks. This ergonomic approach makes the tool accessible to a wide range of users, from seasoned professionals to those who are just starting in the field.

Festool's commitment to technology is evident in the PAC574368. The tool features advanced engineering that enhances its performance and efficiency. Moreover, it is designed for easy maintenance, with readily available replacement parts that ensure it can remain operational for many years.

In conclusion, the Festool PAC574368 stands out due to its compatibility with dust extraction systems, high-quality materials, ergonomic design, and advanced engineering. Whether for professional use or serious hobbyists, this tool is an excellent choice for anyone looking to achieve superior results in their woodworking projects. With Festool’s reputation for excellence backing it, users can trust that they are investing in a high-performing and reliable tool that will meet their needs.
Top Page Image Contents