Unpacking
Upon delivery, open shipping containers and check that all parts are in good condition. Any damage should be reported to your distributor and shipping agent immediately. Before proceeding further, read your manual and familiarize yourself thoroughly with assembly, maintenance and safety procedures.
Compare the contents of your container with the following parts list to make sure all parts are intact. Missing parts, if any, should be reported to your distributor. Read the instruction manual thoroughly for assembly, maintenance and safety instructions.
Shipping Contents
1Front Panel with Door (Stand)
1Rear Panel (Stand)
2Side Panel (Stand)
1Shelf
2M5x10 Screw
2M5 Flat Washer
2M5 Lock Washer
1Extension Table Assembly
1Drum Guard & Dust Port
1Owner’s Manual
1Warranty Card
1Table and Motor Unit
1Back Stop Bracket
1Belt Tension Handle
1Belt Tracking Tool
1Miter Gauge Assembly
1Sanding Belt
Cabinet Hardware
1Lock Knob (20mm Length)
2Lock Knob (12mm Length)
1Lock Knob (35mm Length)
4Cabinet Pads
45/16” x 5/8” Screws
225/16” Flat Washers
125/16” Hex Nuts
85/16” x 5/8” Hex Cap Bolts
25/16” x
4Larger O/D 5/16” Flat Washers
105/16” Lock Washers
Extension Table Hardware
51/4" x 5/8” Hex Cap Bolts
51/4" Flat Washers
51/4” Lock Washers
1Bracket
2
Dust Chute Hardware
3 Pan Head Screws
Tools Needed for Assembly
212mm Wrench or sockets
110mm Wrench or sockets
1Flat Head Screw Driver
1Cross Point Screw Driver
7