Jet Tools JSG-96 operating instructions Dust Collection, Lubrication, Optional Accessories

Dust Collection

1.Hook the sander to a dust collector using a 4” diameter hose and clamp (A, Fig. 16). JET offers a wide variety of hoses, adapters and dust collectors.

2.Loosen the wing nut (B, Fig. 16) and pull the gate (C, Fig. 16) open to allow air suction to the sanding belt. Push the gate closed to shut off air suction. Tighten the wing nut.

3.Push the gate (D, Fig. 16) down to shut off air suction to the disc. Lift the gate to open the air suction to the disc.

Lubrication

All moving parts run on sealed ball bearings and require no lubrication.

Optional Accessories

Open Stand w/Belt Rack 708596

Closed Stand w/Belt Rack708597

JET Stik Abrasive Belt and Disc Cleaner 57620025

Dust Collectors and Accessories see JET Distributor

JSG-96 Sanding Belts, Master Carton 10

6”x48”	24 Grit	40 Grit	60 Grit	80 Grit	100 Grit	120 Grit	150 Grit	180 Grit
Close	57617110	57617210	57617410	57617510	57617610	57617710	57512210	57512310
d Coat
Open	57432910	57422110	57422210	57422310	57422410	57422510	57422610	57422710
Coat

JSG-96 Sanding Disc PSA Aluminum Oxide Cloth Back Sanding Disc, Master Carton 25

9”	36 Grit	50 Grit	60 Grit	80 Grit	100 Grit	120 Grit
Close	57697525	57697650	57697750	57697850	57697950	57698050
d Coat

13