The switch (1.1) acts as an ON / OFF switch (I = ON / 0 = OFF).
1.1
Electronic control
The ETS 125 EQ has an electronic control ELECTRONIC with which the rotational speed can be
varied
This allows the sanding speed to be adapted to the optimum level according to the material concerned (see "Working with the tool").
The speed is set using the rotary control button (2.1).
2.1 |
Dust extraction
Dust extractors prevent large accumulations of dust in the air in the working environment and dirt collecting in the workplace.
The
Inserting a turbo-filter
-Push the filter holder with its opening (3.2) as far as it will go onto the extraction nozzle (3.1) of the machine and clamp tight by turning rotary knob (3.3).
-Push the front cardboard section of the turbo- filter with the sealing lip (3.7) onto the extraction nozzle (3.6) of the filter holder.
-Insert rear cardboard section with slot (3.9) onto the retaining strip (3.8) of the filter holder.
External extraction by
an extraction unit
In order to avoid frequent changing of the turbo- filter when carrying longer sanding jobs, it is possible to connect a Festool extractor to the unit instead of using inbuilt extraction.
4.1
In this case, the extraction pipe (Ø 27 mm (4.1)) of the extraction unit is connected to the suction nozzle.
Inboard extraction
3.1 | 3.2 | 3.3 | 3.4 |
|
| 3.5 |
|
| |
| 3.6 |
| 3.7 |
|
|
|
| 3.8 | 3.9 |
The machines are fitted with inbuilt extraction as standard. The sanding dust is extracted through suction openings in the sanding base (3.5) and trapped in the
Attaching sanding material
Stickfix is a
5.1
5.2
Simply press the abrasive (5.1) onto the sanding base (5.2) and pull it off again after use.
Please note: Use only abrasives with an undamaged Stickfix
Always use original Festool sanding materials!
4