Festool PN571903, PI571903 Extension cord, Tool settings, Electronic control, Dust extraction

Page 4

Electrical connec- tion and operation

The mains voltage must correspond with the volt- age on the rating plate!

See the following figure for connection and dis- connection of the power cable.

Always switch the machine off before connecting or disconnecting the power cable!

Switch (2.1) is an on/off switch. For continuous use it can be engaged with the lateral locking button (2.2). Pressing the switch again releases the lock.

2.1 2.2

2.3

Extension cord

If an extension cord is required, it must have suf- ficient cross-section to prevent an excessive drop in voltage or overheating. An excessive drop in voltage reduces the output and can lead to failure of the motor. The table below shows you the cor- rect cord diameter as a function of the cord length for the ETS 150/3 EQ, ETS 150/5 EQ.

Total Extension Cord

25

50

100

150

Lenght (feed)

 

 

 

 

Cord size (AWG)

18

16

16

14

 

 

 

 

 

Use only U.L. and CSA listed extension cords. Never use two extension cords together. Instead, use one long one.

Note: The lower the AWG number, the stronger the cord.

Tool settings

Always remove the power plug from the socket before carrying out any work on the power tool.

Electronic control

You can regulate the speed steplessly between 6000 and 10500 rpm using the adjusting wheel (2.3). This lets you optimize the sanding speed to suit the material (see "Working with the tool").

Dust extraction

Dust extractors prevent large accumulations of dust in the air in the working environment and dirt collecting in the workplace.

Inboard extraction

 

 

 

3.1

3.2

3.3

3.4

3.5

3.6

3.7

3.8

3.9

The machines are fitted with inbuilt extraction as standard. The sanding dust is extracted through suction openings in the sanding base (3.4) and trapped in the turbo-filter (3.2).

The turbo-filter has to be changed when it is so full of dust that the extraction power diminishes:

–Push the front cardboard section of the turbo- filter with the sealing lip (3.1) onto the extraction nozzle (3.8) of the filter holder

–Insert rear cardboard section with slot (3.3) onto the retaining strip (3.9) of the filter holder

–Push the filter holder with its opening (3.6) as far as it will go onto the extraction nozzle (3.5) of the machine and clamp tight by turning rotary knob (3.7).

External extraction by an extraction unit

4.1

In order to avoid frequent changing of the turbo- filter when carrying longer sanding jobs, it is possible to connect a Festool extractor to the unit instead of using inbuilt extraction.

In this case, the extraction pipe (Ø 27 mm) (4.1) of the extraction unit is connected to the suction nozzle.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents ETS 150/3 EQ ETS 150/5 EQ Safety rules ContentsGeneral safety rules Specific Safety Rules Technical dataSymbols ServiceTool settings Extension cordElectronic control Dust extractionMaintenance and care Choice and installation of the grinding disksAttaching sanding material Working with the toolAccessories, tools WarrantyConditions of 1+2 Warranty Festool Limited WarrantyRégles de sécurité Table des matièresRégles de sécurité générales Utilisation et entretien des outils Règle de sécurité particu Lière supplémentaireEntretien et réparation Symbole Caracteristiques techniquesUtilisation conforme Câble de rallongeAspiration de la poussière Fixer l’abrasifChoix et montage des sup Ports de ponçage Travailler avec la machineAccessoires, outils Entretien et maintenanceBlocage du patin de ponçage Conditions de la garantie 1+2 ans GarantieGarantie limitée de Festool Normas de seguridad ContenidoNormas generales de seguridad Uso y cuidado de la herramienta Normas de seguridad específicasMantenimiento Datos técnicos SímbolosUso conforme a la destinación Cable de extensiónSelección y montaje de Los discos de lijar Fijación del material abrasivoTrabajo con la máquina Freno del plato de lijado Mantenimiento y conservaciónAccesorios, herramientas Condiciones de la Garantía 1 + GarantiáGarantía limitada de Festool

PAC571916, PI571916, ETS 150 EQ, ETS 153 EQ, PI571903 specifications

The Festool PAC571903, also known as the ETS 155 EQ, is a compact and versatile sander that embodies the company's commitment to high-quality engineering and user-focused design. This sander is particularly popular among professionals in woodworking and carpentry due to its efficient mechanics and robust performance.

A key feature of the ETS 155 EQ is its exceptional dust extraction capabilities. With an integrated dust extraction port, users can connect the sander to a Festool dust extractor, ensuring a clean work environment and an extended tool lifespan. The design minimizes dust accumulation, making it ideal for indoor use where cleanliness is paramount.

The ETS 155 EQ sander boasts a powerful and effective motor, delivering excellent results with its 5-inch sanding pad. Users can enjoy a high-quality finish due to the sander's ability to maintain consistent power output and speed. Additionally, the tool comes with a variable speed setting, allowing users to adjust the RPM to match the specific material and application needs.

Another notable technology found in the ETS 155 EQ is the vibration control system. The tool is engineered to minimize vibrations during operation, significantly reducing user fatigue for extended periods of sanding. This feature translates into a more comfortable user experience and better precision, especially in detailed tasks.

The innovative design of the sander includes an ergonomic grip that enhances control and maneuverability. Its lightweight construction further contributes to its usability, enabling users to handle it with ease in various orientations and spaces.

The PAC571903 also highlights modularity and versatility. It is compatible with a range of accessories and sanding pads, providing users with the ability to switch between different grits effortlessly, thereby tackling diverse projects. This adaptability makes it suitable for light sanding, finishing, and preparation work on various surfaces, from wood to painting.

In summary, the Festool PAC571903, ETS 155 EQ, and its associated component, PI571903, represent excellence in the power tool market. With its outstanding dust extraction, effective motor, vibration control technology, ergonomic design, and modular system, the ETS 155 EQ is a powerful ally for craftsmen seeking efficiency and precision in their work. Whether for professional use or serious DIY projects, this sander delivers quality results that meet high standards.
Top Page Image Contents