Festool PN567863 Working with the tool, Maintenance and care, Accessories, tools, Warranty

Page 5

Always use original Festool sanding materials!

Working with the tool

Always secure the workpiece in such a manner that it cannot move while being sanded.

Never overload the tool by using too much pressure! The best sanding results are achieved when applying moderate pressure.

The sanding performance and quality depend mainly on the choice of the right sanding material. Festool offers the appropriate sanding material for all applications (see Festool catalogue).

We recommend the following settings on the rotary control (2.1) for electronic machines:

5 - 6

-sanding with max. drive

-sanding old paint

-sanding wood and veneer prior to painting

-interim sanding of paint on surfaces

4 - 5

-sanding of thinly applied primer

-sanding of wood with sanding vlies

-sanding edges on wooden parts

-smoothing primed wooden surfaces.

3 - 4

-sanding full wooden and veneer edges

-sanding in the grooves/rebates of windows and doors

-interim paint sanding on edges

-pre-sanding natural wood windows with sanding vlies

-smoothing wood surfaces with sanding felt prior to staining

-rubbing down stained surfaces with sanding vlies

-rubbing down or removing excess lime paste with sanding vlies

2 - 3

-interim paint sanding on stained surfaces

-cleaning natural wood window grooves with sanding felt

1 - 2

-sanding stained edges

-sanding thermoplastic synthetics

Maintenance and care

Always remove the plug from the mains supply socket before carrying out any work on the machine!

The cooling air vents on the motor housing must always be free of blockages and clean to ensure air circulation.

Any maintenance or repair work requiring the motor housing to be opened may only be carried out by an authorised service workshop.

Accessories, tools

For safety reasons, only use original Festool accessories and tools!

The accessory and tool order number can be found in the Festool catalog or on the Internet under www.festool-usa.com.

Systainer

Many Festool products are shipped in a unique system container, called "Systainer". This provides protection and storage for the tool and acces- sories. The Systainers are stackable and can be interlocked together. They also can be interlocked atop Festool CT dust extractors.

6.3

6.2

6.1

-Place one systainer on top of the other.

-Release all four latches on the lower systainer by pulling back at their top edges (6.1).

-Slide all four latches upward (6.2).

-Snap all four latches back to their flat position (6.3) so they engage the stacking tabs of the upper systainer.

Warranty

Conditions of 1+2 Warranty

You are entitled to a free extended warranty (1 year + 2 years = 3 years) for your Festool power tool. Festool shall be responsible for all shipping costs during the first year of the warranty. During the second and third year of the warranty the customer is responsible for shipping the tool to Festool. Festool will pay for return shipping to the customer using UPS Ground Service. All warranty service is valid 3 years from the date of purchase on your receipt or invoice.

Festool Limited Warranty

This warranty is valid on the pre-condition that the tool is used and operated in compliance with the

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Guide d’utilisation Work area safety General safety rulesElectrical safety Personal safetySymbols Technical data RTS 400 Q / RTS 400 EQService Electrical connec Tion and operationDust extraction Electronic controlAttaching sanding material Inboard extractionAccessories, tools Maintenance and careWarranty Working with the toolPage Sécurité de aire de travail Régles de sécurité généralesSécurité électrique Sécurité des personnesCaracteristiques techniques RTS 400 Q / RTS 400 EQ SymboleUtilisation et entretien des outils Entretien et réparationUtilisation conforme Raccordement électri Que et mise en serviceRéglage électronique Aspiration de la poussièreAccessoires et outils Entretien et maintenanceAspiration extérieure à l’aide d’un aspirateur Fixer l’abrasifGarantie limitée de Festool Garantie Conditions de la ga Rantie 1+2 ansSeguridad del espacio de trabajo Normas generales de seguridadSeguridad eléctrica Seguridad personalSímbolos Datos técnicos RTS 400 Q / RTS 400 EQUso y cuidado de la herramienta MantenimientoConexión eléctrica y Puesta en servicio Uso conforme a lo determinadoRegulación electrónica Dispositivo de aspi Ración de polvoFijación del material abrasivo Dispositivo de aspiración ex Terna, con aspiradorTrabajo con la lijadora Mantenimiento y conservaciónGarantiá Accesorios, herramientasCondiciones de la Garantía 1 + Garantía limitada de Festool

PN567863, RTS 400 Q, RTS 400 EQ, PI567863 specifications

The Festool RTS 400 EQ and RTS 400 Q are renowned among woodworking professionals and hobbyists, distinguished by their precision, reliability, and user-friendly design. These compact and lightweight palm sanders are engineered to achieve an exceptional finish on a variety of surfaces, including wood, metal, and composite materials.

One of the main features of the RTS 400 EQ and RTS 400 Q is their powerful motor that delivers consistent performance. With a speed adjustment feature, users can easily tailor the sanding speed to match the material and task at hand, ensuring optimal results. The sanders are equipped with a 2.5 mm orbital stroke, which allows for efficient material removal while minimizing swirl marks on finished surfaces.

The RTS 400 series utilizes advanced dust extraction technology that enhances cleanliness and efficiency. Equipped with a robust dust collection system, these sanders can be connected to Festool’s range of dust extractors. This feature not only keeps the workspace clean but also contributes to better visibility and a healthier working environment by reducing airborne dust particles.

In terms of ergonomics, both models are designed with the user in mind. They feature a soft-grip handle that allows for comfortable prolonged use, reducing fatigue during extensive sanding tasks. The compact and lightweight structure enhances maneuverability, making it easy to reach tight spaces or work on vertical surfaces.

The sanding pads for the RTS 400 EQ and RTS 400 Q are easily replaceable due to the innovative hook and loop system, allowing for quick and efficient paper changes. This capability ensures that users can maintain productivity without unnecessary downtime.

Additionally, both models incorporate Festool’s patented Plug-It power system, enabling easy cable replacement without needing to send the tool for servicing. This feature significantly enhances the longevity of the sanders and offers peace of mind to users.

Ultimately, the Festool RTS 400 EQ and RTS 400 Q are designed for professionals seeking high performance and durability in a compact sander. With their precision engineering, advanced dust extraction, ergonomic design, and user-friendly features, they provide an exceptional solution for various sanding applications, meeting the high standards of discerning woodworkers and craftsmen.
Top Page Image Contents