9.Do not leave the tool running. Operate the tool only when
10.Do not touch the workpiece immediately after operation; it may be extremely hot and could burn your skin.
11.Check that the workpiece is properly sup- ported.
12.Pay attention that the wheel continues to rotate after the tool is switched off.
13.This tool has not been waterproofed, so do not use water on the workpiece sur- face.
14.Ventilate your work area adequately when you perform sanding operations.
15.Use of this tool to sand some products, paints and wood could expose user to dust containing hazardous substances. Use appropriate respiratory protection.
SAVE THESE INSTRUCTIONS
WARNING:
MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.
SYMBOLS |
The followings show the symbols used for tool.
V ....................... volts
................alternating current
A | amperes | n˚ | no load speed |
.................... | |||
Hz | hertz | .../min | revolutions or reciprocation per |
|
|
| minute |
6