Makita PV7001C instruction manual Installing or removing backing pad

Page 9

003453

1

2

3

1.Backing pad

2.Spindle

3.Wrench

003454

1

2

1.Sponge pad

2.Pad

 

003468

1

3

2

 

1.Wool bonnet

2.Lock nut

3.Rubber pad

003469

1

2

1.Lock nut wrench

2.Wrench

Installing or removing backing pad

Hold the spindle with the wrench so that it cannot revolve. Then screw the pad onto the spindle all the way. (The pad can be used to install the optional sponge pad.)

To remove the pad, follow the installation procedure in reverse.

Installing or removing sponge pad (optional accessory)

To install the sponge pad, first remove all dirt or foreign mat- ter from the pad. Install the sponge pad to the pad.

To remove the pad, pull it off from the pad slowly.

Installing or removing the wool bonnet (optional accessory)

Mount the rubber pad onto the spindle. Screw the lock nut onto the spindle.

To tighten the lock nut, hold the spindle with the wrench so that it cannot revolve, then use the lock nut wrench and securely tighten clockwise.

9

Image 9
Contents Electronic Polisher Specifications Personal Safety Service Specific Safety Rules Symbols Switch action Speed adjusting dialFunctional Description Assembly High-Low speed setting buttonInstalling side grip auxiliary handle & cover Installing or removing backing pad Installing or removing sponge pad optional accessoryInstalling or removing the wool bonnet optional accessory Installing or removing abrasive disc optional accessory OperationPolishing operation by sponge pad Polishing operation by wool bonnet MaintenanceSanding operation Replacing carbon brushesAccessories Makita U.S.A., Inc Mail this Portion Factory Service Centers Makita Limited ONE Year Warranty