003444 |
•Electronic constant speed control
Possible to get fine finish, because the rotating speed is kept constantly even under the loaded condition.
•Soft start feature
Soft start because of suppressed starting shock.
High-Low speed setting button
The tool speed can be changed instantly while the tool is running. Depress the “I” position for lowest speed and depress “II” position for a given number setting.
The tool speed cannot be changed when the button is in “I” position, even if you turn the speed adjusting dial. When you turn the speed adjusting dial, always be sure that the button is depressed in “II” position.
ASSEMBLY
CAUTION:
•Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.
003412 |
1 |
2 |
1.Cover
2.Side grip
003413
1
2
1. Cover
2. Side grip
Installing side grip (auxiliary handle) & cover
CAUTION:
•Always be sure that the side grip is installed securely before operation.
Install the cover, then screw the side grip on the tool securely. The side grip and the cover can be installed on either side of the tool.
8