Makita PV7001C instruction manual Specifications

SPECIFICATIONS

Model	PV7001C
No load speed (RPM)	600 - 2,000/min.
Overall length	210 mm (8-1/4”)
Net weight	2.0 kg (4.4 lbs)
Spindle thread	5/8”

•Manufacturer reserves the right to change specifications without notice.

•Specifications may differ from country to country.

GENERAL SAFETY RULES USA001-2

(For All Tools)

WARNING:

Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

Work Area Electrical Safety

1.Keep your work area clean and well lit. 4. Grounded tools must be plugged into an

Cluttered benches and dark areas invite acci-	outlet properly installed and grounded in
dents.	accordance with all codes and ordi-
2. Do not operate power tools in explosive	nances. Never remove the	grounding
	prong or modify the plug in any way. Do
atmospheres, such as in the presence of
	not use any adaptor plugs. Check with a
flammable liquids, gases, or dust. Power
	qualified electrician if you are in doubt as
tools create sparks which may ignite the dust
	to whether the outlet is	properly
or fumes.
	grounded. If the tools should electrically mal-
3. Keep bystanders, children, and visitors
	function or break down, grounding provides a
away while operating a power tool. Distrac-	low resistance path to carry electricity away
tions can cause you to lose control.	from the user.

2