SECTION
SECTION 6—BACK
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or damage may occur.
Remove the back for unoccupied transportation purposes only. Securely install the back onto the wheelchair before use.
Removing/Installing the Back (Removable Back Only)
NOTE: For this procedure, refer to FIGURE 6.1.
1.Remove the two adjustment knobs on the wheelchair frame.
2.Remove the back canes from the wheelchair frame.
NOTE: To install the back, reverse this procedure.
Back
Canes
Wheelchair
Frame
Wheelchair
AdjustmentFrame
Knobs
FIGURE 6.1 Removing/Installing the Back (Removable Back Only)
Part No. 1130169 | 25 | Atlas™ |