Invacare Atlas manual Adjusting Footrest Height, Raising/Lowering Elevating Legrest Assembly

SECTION 4—FRONT RIGGINGS

Adjusting Footrest Height

NOTE: For this procedure, refer to

FIGURE 4.2.

1.Loosen, but DO NOT remove, the screw and locknut that secures the lower footrest assembly to the upper footrest support.

2.Reposition the lower footrest assembly to the desired height.

3.Securely tighten the screw and locknut that secures the lower footrest assembly to the upper footrest support.

4.If necessary, repeat STEP 1‐3 for the opposite side of the wheelchair.

Upper

Footrest

Support

Screw

Locknut	Lower Footrest
	Assembly

FIGURE 4.2 Adjusting Footrest Height

Raising/Lowering Elevating Legrest Assembly

NOTE: For this procedure, refer to FIGURE 4.3.

1.To raise the elevating legrest, the assistant or user should hold the support tube and raise the elevating legrests until the desired height is obtained.

2.To lower the elevating legrest, perform the following:

A.Support the user leg with one hand.

B.Push legrest release lever down with other hand.

C.Gently lower user leg down and rest it against the legrest.

Legrest Release Lever

Support Tube

FIGURE 4.3 Raising/Lowering Elevating Legrest Assembly

Part No. 1130169 23 Atlas™