LABEL LOCATION
LABEL LOCATION
IMPORTANT NOTICE
The wheel locks on this wheelchair have been
3.2.4.5.3.If these wheel locks do not meet your needs, follow instructions below.
!CAUTION
Any wheel lock adjustments should embed wheel lock shoe at least 1/8" into tire when locked (3/16" on pneumatic tires).
INSTRUCTIONS FOR WHEEL
LOCK ADJUSTMENTS
1.Loosen wheel lock mounting fastener, which runs through mounting bracket and frame.
2.Slide clamp toward rear wheel until wheel lock shoe is embedded into tire material at least 1/8" when handle is engaged to the lock position (3/16" for pneumatic tires).
3.Tighten mounting fastener to secure mounting bracket in desired location and recheck lock shoe embedding.
4.Inspect for correct locking action BEFORE actual use.
Crossmember
Lower
Frame
Tube
Atlas™ | 8 | Part No. 1130169 |
