SECTION
SECTION 11—OPTIONS
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or damage may occur.
Installing Anti-Tippers
NOTE: For this procedure, refer to FIGURE 11.1.
1.Remove the rubber tip from the lower frame tube.
2.Slide the anti‐tipper onto the lower frame tube until the anti‐clamp wraps around the lower frame tube.
3.Tighten the anti‐tipper clamp by turning the locknut counter‐clockwise.
4.Repeat STEPS 1 to 3 for the other anti‐tipper.
Lower
Frame
Clamp Tube
Locknut
FIGURE 11.1 Installing Anti-Tippers
Part No. 1130169 | 31 | Atlas™ |
