SECTION
SECTION 8—FRONT CASTERS
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or damage may occur.
Adjusting Front Caster Height
WARNING
Make sure both front casters are the same size and are installed into the same respective mounting hole before using the wheelchair. Otherwise, injury may occur.
NOTE: For this procedure, refer to FIGURE 8.1.
1.Remove the hex screw, washers and locknut that secure the front caster to the fork.
2.To reinstall the new front caster onto the fork, reverse STEP 1.
Fork | Locknut |
|
Hex
Screw
Front
NOTE: Adjustable height
Caster fork shown.
FIGURE 8.1 Adjusting Front Caster Height
Part No. 1130169 | 27 | Atlas™ |
