HP Pro100B 8 Connecting to a Novell NetWare 5.0 Server, 2nd edition, Microsoft Windows 98 Requirements

Connecting to a Novell NetWare 5.0 Server

Microsoft Windows 98 2nd edition

8 Connecting to a Novell NetWare 5.0 Server

Microsoft Windows 98 Requirements
2nd edition
	Operating System	Windows 98 2nd edition
	Driver Version	3.37.07
	Driver File	E100bnt.sys
	Server OS	Novell NetWare 5.0 Server
	Client OS	Client v3.1 for Windows 95/98

Procedure

1With the HP Vectra turned off, install the network adapter into a PCI slot.

2Connect the network cable to the newly installed network adapter.

3Power on the machine and boot to Windows 98.

4Windows 98 will detect the network adapter as “Intel PRO/100B PCI Adapter” during start up and install the OS embedded driver.

5Click on “Yes” when Windows 98 prompts to restart the system.

6After restarting the system, additional changes in the network properties, such as: workgroup name, computer name, etc. may be necessary. Ask your Network Administrator for more information. Restart the system if changes are made.

7From the location of the “Novell Client v3.1 for Windows 95/98” installation files, execute “Setup.exe”.

8Click on “Yes” to accept the “Novell Terms and Conditions”.

9Select either “Typical” or “Custom” and click on “Install”. Typical Installation is normally chosen. Select Custom Installation only if you are an administrator or an advanced user. When prompted for options during installation, ask your Network Administrator for more information.

10Click on “Reboot” once the installation is complete.

18