HP Pro100B manual Connecting to a Novell NetWare 4.11 Server

Connecting to a Novell NetWare 4.11 Server

Microsoft Windows NT 4.0 Workstation

7 Connecting to a Novell NetWare 4.11 Server

Microsoft Windows NT 4.0 Workstation

Requirements

Operating System	Windows NT 4.0 Workstation
Driver Version	3.36.10
Driver File	E100bnt.sys
Server OS	Novell NetWare 4.11 Server
Client OS	Client v4.6 for Windows NT

Procedure

1With the HP Vectra turned off, install the network adapter into a PCI slot.

2Connect the network cable to the newly installed network adapter.

3Power on the machine and boot to Windows NT.

4Log into Windows NT with administrator privileges.

5The following steps are based on a first-time installation of Networking on the system. Adding a NIC to a previously installed Networking has some minor differences. Ask your administrator for more information.

6Open the “Network Properties” windows and agree to install “Windows NT Networking”.

7With “Wired to the Network” checked, click on “Next”.

8Click on the option to “Select from list…” then on “Have Disk…”.

9Insert the driver disk and click on “OK”.

10With “Intel Pro Adapter” highlighted, click on “OK”.

11With the “Intel Pro Adapter” listed in the “Network Adapters:” window, click on “Next”.

12Select all the applicable network protocols and click on “Next”.

13At the “Network Services:” prompt, accept the default settings and click on “Next”.

16