INTRODUCTION
ForewordSpecifications
The specifications, details, and photographs in this manual represent the Model H8253 as supplied when the manual was prepared. However, owing to Grizzly’s policy of continuous improvement, changes may be made at any time with no obligation on the part of Grizzly.
If you have any comments regarding this manual, please write to us at the following address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA
Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570)
Fax: (800)
Web Site: http://www.grizzly.com
Motor Speed | 18,000 RPM | |
Air Consumption | 28 CFM | |
Air Inlet | ||
Required PSI | ||
Maximum PSI | 90 PSI | |
Abrasive Belt Size | 1" W x 18" L | |
Sound Level | 84 dB | |
| Inventory |
|
H8253 Inventory (Figure 1) | Qty. | |
A. | Handle | 1 |
B. | Contact Arm Assembly | 1 |
C. | Hex Wrench (3mm) | 1 |
D. | Air Motor Assembly | 1 |
E. Sanding Belts 1" x 18" | 11 | |
F. | Cap Screw | |
G. Belt Guard | 1 | |
| B |
|
| A |
|
|
| D |
| C |
|
| F | E |
| G |
|
| Figure 1. Model H8253 Inventory. | |
Model H8253 Air Belt Sander |