OPERATIONS
Read the manual before operation. Become familiar with this tool, its safety instructions, and its operation before beginning any work. Serious personal injury may result if safety or operational information is not understood or followed.
Sanding Belt
Installing the Sanding Belt
1.DISCONNECT THE SANDER FROM THE AIR SUPPLY!
2.Place the sanding belt over the contact wheel, as shown in Figure 5.
Belt
Contact Wheel
Like all tools there is potential danger when operating this tool. Accidents are frequently caused by lack of familiarity or failure to pay attention. If normal safety precautions are overlooked or ignored, serious personal injury may occur.
To avoid accidental starting, disconnect the sander from the air supply when it is not in use.
Figure 5. Preparing the sanding belt.
3.Compress the contact arm shaft by pressing the contact wheel towards the drive wheel. Slide the belt over the drive wheel until it is centered, then release pressure (Figure 6).
Contact Wheel |
Belt |
Drive Wheel |
Figure 6. Attaching the sanding belt.
Model H8253 Air Belt Sander |