Inventory
After all the parts have been removed from the two boxes, you should have the following items:
Box 1: (Figures 4 & 5) | Qty | |
A. | Metalworking Sander | 1 |
B. | Spark Trap | 1 |
C. | Eye Shield | 1 |
D. | Rest | 1 |
| Hardware Bag (not shown) | 1 |
| — Hex Bolt | 1 |
| — Hex Nut | 1 |
| — Flat Washers (Base) | 2 |
| — Sleeve | 1 |
| — Cap Screw | 1 |
| — Angle Adjustment Lever | 1 |
| — Rest Lever | 1 |
| — Square Nut | 1 |
A
BC
D
Figure 4. Model G0489 Inventory.
G0489 Metalworking Sander
E. Base | 1 |
E
Figure 5. Model G0489 Base.
In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or for the sake of expedi- ency, replacements can be obtained at your local hardware store.
NOTICE
Some hardware/fasteners on the inventory list may arrive