Sanyo SAP-CRV123EH Using the Remote Control Unit, Rear side Remote control unit mount, Hole

Page 62

Using the Remote Control Unit (continued)

How to Use the Remote When using the remote control unit, always point the unit’s transmitter head Control Unit directly at the air conditioner’s receiver.

Air conditioner (Indoor unit)

 

Receiver

Remote control

(Transmitter head)

unit

 

Remote Control Unit The remote control unit may be operated either from a non-fixed position or Installation Position from a wall-mounted position. To ensure that the air conditioner operates

correctly, DO NOT install the remote control unit in the following places:

DO NOT • In direct sunlight

Behind a curtain or other places where it is covered

More than 8 m away from the air conditioner

In the path of the air conditioner’s airstream

Where it may become extremely hot or cold

Where it may be subject to electrical or magnetic noise

Where there is an obstacle between the remote control unit and air conditioner (since a check signal is sent from the remote control unit every 5 minutes)

Mounting the Remote Control Before mounting the remote control unit, press the ON/OFF operation button Unit at the mounting location to make sure that the air conditioner operates from that location. The indoor unit should make a beeping sound to indicate that it

has received the signal.

Rear side

Remote control unit mount

Press

Mounting screws 4 x 16 (included)

Set in place

Hole

To prevent loss of the remote control unit, you can connect the remote control unit to the mount by passing a string through the remote control unit and attachment hole.

 

To take out the remote control unit, pull it forward.

When Holding the Remote

• When using the remote control unit and during air conditioner operation,

Control Unit

the transmitter on the remote control unit should be pointed toward the

 

receiver on the indoor unit.

 

• Make sure that there are no objects between the remote control unit and

 

receiver which could block the signal.

OI-671-11EG

11

 

Image 62
Contents DC Inverter Split System AIR Conditioner Please Read Before Starting Table of Contents Temperature Indoor Air Intake Temp Outdoor Air Intake Temp Operating RangeIndoor Unit SpecificationsUnit Specifications SAP-KRV93EHSAP-KRV123EH Outdoor Unit SAP-CRV123EHMajor Component Specifications SAP- KRV93EHSAP- KRV123EH Outdoor Unit Outdoor Unit SAP- CRV93EHOutdoor Unit SAP- CRV123EH SAP- CRV123EH Other Component SpecificationsIndoor Unit SAP- KRV93EH Data Ø65SAP-CRV123EH AIR DischargeInsulation of Refrigerant Tubing Refrigerant Flow DiagramRefrigerant Flow Diagram Proper insulation material. The thickness of the insulationIndoor Unit SAP-KRV93EH Outdoor Unit SAP-CRV93EH Temperature ChartsPerformance Data Indoor Unit SAP-KRV123EH Outdoor Unit SAP-CRV123EH Indoor Air TempAir Throw Distance Charts Axis air Vertical Indoor Unit SAP- KRV93EH Outdoor Unit SAP- CRV93EH Operating Frequency Charts230V Single-phase 50Hz CoolingHeating Indoor Unit SAP- KRV123EH Heating Electrical Data SAP-CRV93EH SAP-KRV93EH Electric Wiring DiagramsOutdoor Unit Indoor Unit SAP-CRV123EH SAP-KRV123EH Indoor Unit SAP-KRV123EHAvoid Installation InstructionsInstallation Site Selection Out Recommended Wire Length and Diameter Wiring System DiagramRemote Control Unit Installation Position To take out the remote control unit, pull it forwardHow to Test Run the Air Conditioner Remove the Grille to Install the Indoor Unit Maintenance Address Setting of the Remote Control UnitHow to Disconnect PAM-αcontrol Emergency operationAuto cooling/heating operation Timer backup Lamp colorsFreeze prevention Compressor discharge temperature controlOverload prevention during heating Cold-air prevention during heatingDefrost detection and release CT Peak current cut-off controlExecuting self-diagnostics Precautions before performing inspection or repairMethod of self-diagnostics S03 S01S02 S04Checking serial communications If self-diagnostics function fails to operateChecking the outdoor unit NormalRemedy for symptom 3 to Diagnostic procedureDiagnostic results Measurement location Normal valueElectromagnetic interference Noise malfunction and electromagnetic interferenceNoise malfunction Checking Electrical Components Measurement of Insulation ResistanceChecking Continuity of Fuse on PCB Ass’y Checklist Before Servicing Refrigerant R410A Special Precautions When Servicing UnitCharacteristics of New Refrigerant R410A HFC32 50% / HFC125 50%No use of refrigerant other than R410A Tubing precautionsNo addition of compressor oil for R410A If refrigerant R410A is exposed to fireTubing Installation Procedures Tools Specifically for R410ACase of Compressor Malfunction Unit. This may cause dam- age to the compressor Configuration and characteristics of cylindersRecharging ExampleCase Refrigerant is Leaking Welding leaking pointsCharging Additional Refrigerant Retro-Fitting Existing SystemsOI-852-6-4180-671-00-0 Features Product Information ContentsAlert Symbols Electrical Requirements Installation LocationSafety Instructions Outdoor Unit Names of PartsIndoor Unit Unit Display and Operation Button Remote Control Unit Display On Time Remote Control UnitHour OFF Timer DRY AutoHeat CoolHow to Install Batteries Using the Remote Control UnitTemperature Display Selector Button Time Display Selector buttonMounting screws 4 x 16 included Using the Remote Control UnitRear side Remote control unit mount HolePress the ON/OFF operation button Operation with the Remote Control UnitStep Operation with the Remote Control Unit Manual OperationAdjusting the Fan Speed Setting Night Setback Mode is used for saving energyCooling and DRY Mode TemperatureQuiet Mode Special Remarks Setting the Timer Operation Indication1030 pm 710 am 1100 am Present time Setting the TimerTo cancel a timer program Press the Cancel button OFFCancellation procedure Using the 1-Hour OFF TimerSetting procedure Operation together with the Daily ON/OFF Repeat TimerAdjusting the Airflow Direction Cool Sweep DRY FAN HeatWhen the air conditioner is not running Operation without the Remote Control UnitCare and Cleaning Care and Cleaning Air intake grille Anti-mold filter CleaningSuffocation in extreme cases FilterTrouble Possible Cause Remedy TroubleshootingOperating Range Osaka, Japan SM700590 FEB/2004
Related manuals
Manual 25 pages 39.04 Kb

SAP-CRV93EH, SAP-CRV123EH, SAP-KRV93EH, SAP-KRV123EH specifications

The Sanyo SAP-KRV93EH and SAP-KRV123EH are innovative air conditioning units that stand out in the market for their performance, energy efficiency, and user-friendly features. Designed to cater to various cooling needs, these models are suitable for both residential and commercial spaces, ensuring comfort in every environment.

One of the main features of both models is their advanced inverter technology. This technology allows the air conditioners to adjust the compressor speed according to the desired temperature, offering precise climate control while significantly reducing energy consumption. This not only translates to lower electricity bills but also minimizes the environmental impact, making the SAP-KRV93EH and SAP-KRV123EH eco-friendly options.

The SAP-KRV93EH has a cooling capacity of 9,000 BTU, while the SAP-KRV123EH boasts an impressive 12,000 BTU. This range ensures that users can choose the appropriate unit according to the size of the room or area requiring cooling. The units are equipped with high-efficiency filters that purify the air, removing dust, allergens, and other particulates. This feature is particularly beneficial for those with allergies or respiratory issues, providing a healthier indoor environment.

In terms of user interface, both models are designed with ease of use in mind. They include a remote control that allows users to adjust settings without needing to get up. Additionally, the units have a programmable timer, ensuring that users can set the air conditioning to operate only when needed, enhancing convenience and energy savings.

Another notable technology present in these models is the “Smart Duct” airflow system. This system optimizes air distribution, allowing for an even distribution of cooled air throughout the room. This means fewer hot spots, leading to a more comfortable living or working space.

Both the SAP-KRV93EH and SAP-KRV123EH have sleek designs that blend well with various interior styles, allowing them to fit seamlessly into homes or offices. Furthermore, they operate quietly, ensuring that users can enjoy a peaceful environment.

Overall, the Sanyo SAP-KRV93EH and SAP-KRV123EH air conditioning units combine advanced technology, energy efficiency, and practical features, making them an excellent choice for those looking to enhance their comfort while being conscious of energy usage. With their robust performance and user-friendly attributes, these models epitomize what modern air conditioning solutions should offer.