Sanyo SAP-KRV93EH, SAP-KRV123EH Defrost detection and release, CT Peak current cut-off control

Page 37

Defrost detection and release

Reverse-Cycle Defrosting

Defrosting Sequence

Heating operation

Outdoor fan ON

4-way valve ON

Frost sensing

Defrost detection occurs in either of the following cases:

The temperature of the heat exchanger remains at or below the L1 line for 3 minutes after the start of HEAT operation.

The temperature of the heat exchanger remains at or below the L2 line for 120 minutes after the start of HEAT operation.

CT (Peak current cut-off control)

This function prevents the circuit breaker or fuse from operating to open the circuit. This function works when electrical current has increased due to an increase in the cooling / heating load, or to a decrease in the power supply voltage. In these cases, operation frequency is reduced or operation is interrupted auto- matically to control the electrical current for operation.

When the cause of the increase in electrical current is rectified, the system will resume operation in the original mode.

SAP-KRV93, KRV123

 

(A)

 

Cooling • Dry

Heating

Peak current cut-off trips

12.0

 

Hz down

8.5

8.5

NOTE Electrical current setting for COOL operation is used during DEFROST operation.

Outdoor heat exchanger temp.

L2

L1

0

Ambient temp.

Frosting area

Reverse-cycle defrosting operation

Compressor 1 minute after it is stopped, compressor is ON.

Outdoor fan OFF

Indoor fan OFF

4-way valve OFF

Operation lamp Repeatedly switches between red and orange illumination.

Releasing of defrosting

Outdoor heating exchanger temp. is over 14°C.

Defrosting operation lasts 12 minutes (maximum). 2 minutes after it is stopped, compressor is ON. 4-way valve is ON. Outdoor fan is ON.

NOTE

If the air conditioner is turned off during the defrosting cycle, it will continue defrosting and turn itself off after defrosting is completed.

37

Image 37
Contents DC Inverter Split System AIR Conditioner Please Read Before Starting Table of Contents Operating Range Temperature Indoor Air Intake Temp Outdoor Air Intake TempUnit Specifications SpecificationsIndoor Unit SAP-KRV93EHOutdoor Unit SAP-CRV123EH SAP-KRV123EHSAP- KRV93EH Major Component SpecificationsSAP- KRV123EH Outdoor Unit SAP- CRV93EH Outdoor UnitOutdoor Unit SAP- CRV123EH Indoor Unit SAP- KRV93EH Other Component SpecificationsSAP- CRV123EH Ø65 DataAIR Discharge SAP-CRV123EHRefrigerant Flow Diagram Refrigerant Flow DiagramInsulation of Refrigerant Tubing Proper insulation material. The thickness of the insulationPerformance Data Temperature ChartsIndoor Unit SAP-KRV93EH Outdoor Unit SAP-CRV93EH Indoor Air Temp Indoor Unit SAP-KRV123EH Outdoor Unit SAP-CRV123EHAir Throw Distance Charts Axis air Vertical 230V Single-phase 50Hz Operating Frequency ChartsIndoor Unit SAP- KRV93EH Outdoor Unit SAP- CRV93EH CoolingHeating Indoor Unit SAP- KRV123EH Heating Electrical Data Outdoor Unit Indoor Unit Electric Wiring DiagramsSAP-CRV93EH SAP-KRV93EH Indoor Unit SAP-KRV123EH SAP-CRV123EH SAP-KRV123EHInstallation Site Selection Installation InstructionsAvoid Out Wiring System Diagram Recommended Wire Length and DiameterTo take out the remote control unit, pull it forward Remote Control Unit Installation PositionHow to Test Run the Air Conditioner Remove the Grille to Install the Indoor Unit Address Setting of the Remote Control Unit MaintenanceHow to Disconnect Auto cooling/heating operation Emergency operationPAM-αcontrol Lamp colors Timer backupOverload prevention during heating Compressor discharge temperature controlFreeze prevention Cold-air prevention during heatingCT Peak current cut-off control Defrost detection and releaseMethod of self-diagnostics Precautions before performing inspection or repairExecuting self-diagnostics S02 S01S03 S04Checking the outdoor unit If self-diagnostics function fails to operateChecking serial communications NormalDiagnostic results Diagnostic procedureRemedy for symptom 3 to Measurement location Normal valueNoise malfunction Noise malfunction and electromagnetic interferenceElectromagnetic interference Measurement of Insulation Resistance Checking Electrical ComponentsChecking Continuity of Fuse on PCB Ass’y Characteristics of New Refrigerant R410A Refrigerant R410A Special Precautions When Servicing UnitChecklist Before Servicing HFC32 50% / HFC125 50%No addition of compressor oil for R410A Tubing precautionsNo use of refrigerant other than R410A If refrigerant R410A is exposed to fireTools Specifically for R410A Tubing Installation ProceduresCase of Compressor Malfunction Recharging Configuration and characteristics of cylindersUnit. This may cause dam- age to the compressor ExampleWelding leaking points Case Refrigerant is LeakingRetro-Fitting Existing Systems Charging Additional RefrigerantOI-852-6-4180-671-00-0 Features Alert Symbols ContentsProduct Information Safety Instructions Installation LocationElectrical Requirements Indoor Unit Names of PartsOutdoor Unit Unit Display and Operation Button Remote Control Unit Display Hour OFF Timer Remote Control UnitOn Time Heat AutoDRY CoolTemperature Display Selector Using the Remote Control UnitHow to Install Batteries Button Time Display Selector buttonRear side Remote control unit mount Using the Remote Control UnitMounting screws 4 x 16 included HoleStep Operation with the Remote Control UnitPress the ON/OFF operation button Manual Operation Operation with the Remote Control UnitAdjusting the Fan Speed Cooling and DRY Mode Night Setback Mode is used for saving energySetting TemperatureQuiet Mode Special Remarks Operation Indication Setting the TimerTo cancel a timer program Press the Cancel button Setting the Timer1030 pm 710 am 1100 am Present time OFFSetting procedure Using the 1-Hour OFF TimerCancellation procedure Operation together with the Daily ON/OFF Repeat TimerCool Sweep DRY FAN Heat Adjusting the Airflow DirectionCare and Cleaning Operation without the Remote Control UnitWhen the air conditioner is not running Air intake grille Anti-mold filter Cleaning Care and CleaningFilter Suffocation in extreme casesOperating Range TroubleshootingTrouble Possible Cause Remedy Osaka, Japan SM700590 FEB/2004
Related manuals
Manual 25 pages 39.04 Kb

SAP-CRV93EH, SAP-CRV123EH, SAP-KRV93EH, SAP-KRV123EH specifications

The Sanyo SAP-KRV93EH and SAP-KRV123EH are innovative air conditioning units that stand out in the market for their performance, energy efficiency, and user-friendly features. Designed to cater to various cooling needs, these models are suitable for both residential and commercial spaces, ensuring comfort in every environment.

One of the main features of both models is their advanced inverter technology. This technology allows the air conditioners to adjust the compressor speed according to the desired temperature, offering precise climate control while significantly reducing energy consumption. This not only translates to lower electricity bills but also minimizes the environmental impact, making the SAP-KRV93EH and SAP-KRV123EH eco-friendly options.

The SAP-KRV93EH has a cooling capacity of 9,000 BTU, while the SAP-KRV123EH boasts an impressive 12,000 BTU. This range ensures that users can choose the appropriate unit according to the size of the room or area requiring cooling. The units are equipped with high-efficiency filters that purify the air, removing dust, allergens, and other particulates. This feature is particularly beneficial for those with allergies or respiratory issues, providing a healthier indoor environment.

In terms of user interface, both models are designed with ease of use in mind. They include a remote control that allows users to adjust settings without needing to get up. Additionally, the units have a programmable timer, ensuring that users can set the air conditioning to operate only when needed, enhancing convenience and energy savings.

Another notable technology present in these models is the “Smart Duct” airflow system. This system optimizes air distribution, allowing for an even distribution of cooled air throughout the room. This means fewer hot spots, leading to a more comfortable living or working space.

Both the SAP-KRV93EH and SAP-KRV123EH have sleek designs that blend well with various interior styles, allowing them to fit seamlessly into homes or offices. Furthermore, they operate quietly, ensuring that users can enjoy a peaceful environment.

Overall, the Sanyo SAP-KRV93EH and SAP-KRV123EH air conditioning units combine advanced technology, energy efficiency, and practical features, making them an excellent choice for those looking to enhance their comfort while being conscious of energy usage. With their robust performance and user-friendly attributes, these models epitomize what modern air conditioning solutions should offer.