Makita 900BL instruction manual For 230 mm

Page 7

I F USED AS A GRINDER

NOTE:

Use grinder accessories specified in this manual. These must be purchased by separate.

WARNING:

Always use guard assembly or accessory kit, noted below, for type 27 depressed center wheel.

Guard assembly

 

Guard accessory kit

 

Part No. 191214-3.. .

For 180 mm (7")

Part No. 191228-2 . . .

For 180 mm (7")

Part No. 191215-1. . .

For 230 mm (9")

Part No. 191231-3 . . .

For 230 mm (9")

Installingor removingdepressed center wheel

CAUTION :

Always be sure that the tool i s switched off and unplugged before installing or removing the wheel.

Mount the inner flange onto the spindle. Fit the wheel on over the inner flange and screw the lock nut onto the spindle.

Inner flange

To tighten the lock nut, press the shaft lock firmly so that the spindle cannot re- volve, then use the lock nut wrench and securely tighten clockwise.

To remove the wheel, follow the installation procedure in reverse.

7

Image 7
Contents Sander Safety Instructions Page Additional Safety Rules for Sander Installing side grip auxiliary handle Page For 230 mm Page Maintenance Accessories Lock nut Sander $FD Makita Limitedone Year Warranty