Dymo 31-250 instruction manual Drum Sander Parts, Carton Contents

Page 7

DRUM SANDER PARTS

CAUTION TAG

CAUTION: Pay close attention to caution tags attached to this machine and follow these instructions precisely. This machine is heavy. Remove the container from around the machine. DO NOT lift it from the container. Carefully unpack all loose items from the shipping container and cut the carton from around the machine.

CARTON CONTENTS

CAUTION:

TAGS

6 4 5

119

1.Drum Sander

2.Legs (2)

3 Feed Table

4.Cable tie (in instruction packet)

5.Thickness Scale (in instruction packet)

6.1/8" T-Handle Hex Wrench(in instruction packet)

7.Table Raising Handwheel

8.5/16-18 x 1” Socket Head Screws (4)

9.5/16" Lock-washers (4)

10.5/16-18 x 5/8” Carriage Head Screws (12)

11.5/16-18 Flange Nuts (16)

Image 7

Contents 18 x 36 Drum Sander Important Safety Instructions Safety Guidelines DefinitionsStay ALERT, Watch What YOU are Doing Hold the Work Firmly when sanding Additional Safety Rules For Drum SandersPower Connections Foreword Unpacking and CleaningDrum Sander Parts Carton ContentsAttaching Legs AssemblyAttaching the Handwheel Attaching Thickness Scale Attaching and Leveling Feed TableStarting and Stopping the Machine Operating Controls and AdjustmentsLocking the Drum Switch in the OFF Position Table FEED/SPEED SwitchTracking Checking and Adjusting Feed Belt Tracking and TensionDisconnect Machine from Power Source Raising and Lowering Feed TableTable Height AT this Time Checking and Adjusting Table Parallel to DrumSetting the Height Scale Changing Drum SPEEDS/REPLACING Drive BeltTo relieve tension on the belt. Replace or change the belt Removing and Replacing Drum Sanding BeltDust Collection Removing and Replacing Feed BeltWhat Factors Affect Sanding OPERATIONS? Frequently Asked QuestionsWhen do I Change the Drum SPEED? What is Recommended for Dust CollectionHOW do I Sand the Edges of BOARDS? What Causes Burn MarksWhat are the Maximum and Minimum Sanding Stock SIZES? HOW do I Sand Multiple BOARDS?Tips for Increasing Sanding Belt Life HOW do I Sand Glued BOARDS?HOW do I Sand Boards Wider than 18? HOW do I GET STARTED?Tension on Timing Belt Table Movement Troubleshooting GuideChecking the Table Support Plate Lock NUT Adjustment Checking Lock NUT AdjustmentFeed Belt Motor Overload Protection MaintenanceBrush Inspection and Replacement Drum Motor Overload ProtectionPage Page PARTS, Service or Warranty Assistance AccessoriesCanadian PORTER-CABLE Delta Service Centers