Schumacher SE-2150MA Meter and Switch Functions, Charge Rate Selector, Operation Selector

Page 3

D.

METER AND SWITCH FUNCTIONS

BATTERY TYPE: You may select between two basic Battery

Types: Regular or Deep Cycle Battery. Both settings operate automatically and will shut off when the battery is fully charged. Use the Regular for all wet-cell, lead-acid batteries. (This charger is not recommended for Gel-Cell and AGM batteries.) Use the Deep Cycle setting for all Deep Cycle wet-cell, lead-acid batter- ies. How can you tell your battery type? Deep Cycle batteries are usually marked as such. If not, the battery will fall under the category of "Regular" batteries. Most automotive batteries are considered "Regular" batteries.

Some Deep Cycle batteries are designed in a way that charging them in the Regular setting is more suitable. When charging a Deep Cycle battery, if the Full Charge indicator lamp does not become illuminated after a 12-hour charge period and the charge current as indicated by the Amp Meter is less than 8 amps, move the switch to the Regular setting. If the Full Charge indi- cator lamp still remains off after charging, you should discon- nect the charger and have both the battery and charger profes- sionally tested.

OPERATION SELECTOR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REGULAR BATTERIES ▲

▲ DEEP CYCLE BATTERIES

AUTOMATIC OPERATION

 

AUTOMATIC OPERATION

6 VOLT, 15 AMP: Used for charging medium and large size wet-cell, lead-acid 6 volt batteries. Do not charge small batter- ies such as used in motorcycles, lawn and garden equipment. (Manual Operation. Monitor frequently while charging a battery.)

12 VOLT, 2 AMP: The 2 amp automatic charge rate is recom- mended for charging small batteries and warming large ones. If used for maintaining the Full Charge level of larger batteries, limit the charge period to a few days at a time. (Automatic Op- eration.)

12 VOLT, 15 AMP: Used for charging medium and large size wet-cell, lead-acid, 12-volt batteries. (Automatic Operation.)

12 VOLT, 110 AMP ENGINE START: Used for crank starting of 12 volt vehicles. The Engine Start position should not be used for battery charging, doing so will cause the charger to overheat and then protect itself by cycling off and on. (Manual Opera- tion.)

CHARGE RATE SELECTOR

▲

▲

▲

▲

15 Amp

2 Amp

15 Amp

110 Amp 12V

6V, Manual

12V Automatic

Engine Start

 

DC AMPS

 

CHARGING

 

START

￿

￿

￿

￿

0

5

10

15

 

FULL

 

CHECK

 

CHARGE

 

BATTERY

METER: The meter indicates the amount of current measured in amperes that is being drawn from the charger by a battery. In the 15 amp charge rate a typical discharged battery may ini- tially draw more than 15 amps during the first few minutes of charge. As the battery continues to charge current should gradu- ally taper to within 6 to 8 amps at full charge.

The START area of the meter is reserved to indicate when a high rate of current is being drawn from the charger. It is normal for the meter pointer to be in this area while cranking a vehicle.

When using the 2 amp charge rate the meter may indicate some activity but doesn’t have the resolution to accurately display the battery’s state of charge. For this reason you should depend on the full charge light indicator.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents General Battery Safety Schumacher Electric CorporationBusiness Center Drive Mount PROSPECT, Illinois Personal Precautions and Safety Grounding and AC Power Cord ConnectionPreparing to Charge Meter and Switch Functions Charge Rate SelectorOperation Selector Positive Grounded Post Operating Instructions Charging Battery in VehicleOperating Instructions Charging Battery OUT of Vehicle Negative Grounded PostOperating Instructions Engine Start TroubleshootingProblem Possible Cause Solution Limited WarrantyPreparando LA Carga Manual DEL PropietarioSeguridad General DE LA Bateria Precauciones Y Seguridad PersonalesTerminal Negativo a Tierra Funciones DEL Medidor Y DE LOS InterruptoresSelector DE Operacion Selector DE Nivel DE CargaGarantia Identificación Y Solución DE ProblemasInstrucciones DE Operacion Arranque DEL Motor Período DE Carga

SE-2150MA specifications

The Schumacher SE-2150MA is a highly versatile and efficient battery charger and maintainer designed for a variety of automotive applications. This compact and powerful device is particularly popular among car enthusiasts and those who require a reliable solution for recharging and maintaining lead-acid batteries, including conventional, AGM, and gel types.

One of the standout features of the Schumacher SE-2150MA is its automatic multi-stage charging technology. This advanced system ensures that the battery is charged quickly and efficiently while minimizing the risk of overcharging. The multi-stage process involves bulk charging, absorption, and float modes, which together promote optimal battery health and longevity. The device is equipped with an intelligent microprocessor that monitors and adjusts the charging process in real-time, providing precise and safe charging for both 12V and 6V batteries.

The SE-2150MA also boasts a built-in LCD display that clearly shows the charge status, voltage, and other relevant information at a glance. This feature enhances user experience, enabling users to keep track of the charging process without having to guess or rely on indicators alone. Additionally, the device is designed with safety in mind; it includes protection against reverse polarity, short circuits, and overheating, ensuring safe operation even for those who may be less experienced with battery maintenance.

Another notable aspect of the Schumacher SE-2150MA is its compact and lightweight design, making it easy to store and transport. This aspect is particularly appreciated by users who need a portable solution that can easily be taken from one vehicle to another or stored in a tight space when not in use.

Furthermore, the SE-2150MA features alligator clips and ring terminals, providing versatility in connection options. This allows users to connect the charger to various types of batteries easily and securely. The long cables enhance maneuverability, making it convenient to reach difficult areas within the engine compartment.

Overall, the Schumacher SE-2150MA combines user-friendly operation, advanced technology, and robust design to deliver a reliable battery charging solution for automotive enthusiasts and everyday drivers alike. Whether for seasonal maintenance or regular use, this charger offers an effective way to keep batteries in peak condition, reflecting Schumacher’s legacy of quality and innovation in automotive care products.
Top Page Image Contents