OPERATION

• Gently step on the power switch once to

 

 

 

 

 

activate the Sweeper and the UV-C light

 

 

 

 

 

 

2 Step Switch

 

function.

 

 

 

 

SWEEP / STERILIZE /

 

• Press switch second time to switch off.

 

1st Step

 

ATTENTION: This Unit features a safety cut-

 

 

 

LIGHT UP

 

 

2nd Step

 

TURN OFF

 

off switch for the UV-C light. When the wheels

 

 

 

come off the floor, the light automatically

 

 

 

 

 

 

 

 

 

 

switches off. Do not allow the UV-C Light to

 

 

 

 

 

come into direct contact with the eyes or skin.

 

 

 

 

 

CHARGING INSTRUCTIONS

 

 

 

 

 

 

 

 

 

 

 

 

• Connect battery charger to the Sweeper

 

 

 

 

 

 

Recharge Status

 

unit. Plug the charger into the electric outlet

 

 

 

 

 

Initial

 

located on your household wall to start

 

RED LIGHT

 

 

Charging Phase

 

charging.

 

 

 

 

 

 

 

 

 

 

 

 

Final

 

• Sweeper may be charged after each use

ORANGE LIGHT

 

Charging Phase

 

for not more than 24 hours or damage to

 

 

 

 

 

 

 

 

 

 

 

 

Fully charged–

 

batteries might occur.

 

GREEN LIGHT

 

 

 

 

 

 

remove charger

 

You can notice the power condition

according to the LED indicator light located on the charger.

When charging the Sweeper, sweeping and sterilizing functions are inoperable.

REPLACING THE BATTERY

• Turn off the power.

Turn the Sweeper upside down and open the battery cover according to the illustration shown.

• Pull out the battery pack and disconnect it from the power wire.

• Insert a new battery pack and reconnect the power wire.

• Replace the battery cover and recharge the sweeper to get it ready to operate.

ATTENTION: New batteries require an initial

12 hour charge before using. After that, recharge until green light appears. Never charge for more than 24 hours or damage to the batteries may occur.

5

Page 6
Image 6
Verilux VH02 manual Operation, Step Switch