American Power Conversion operation manual Use two people to lift the Redundant Switch

Mount the Redundant Switch in the rack

Connect your equipment

Installation

Use two people to lift the Redundant Switch.

Heavy

1.Slide the front rail segments attached to the Redundant Switch into the rear rail segments attached to the rack.

2.From the rear of the rack, insert and tighten the slide screws and nuts.

Do not connect laser printers through the

Redundant Switch

Caution

1.Use your server’s power cords to connect to the Redundant Switch.

2.Connect a communications cable (940-1000A) between each UPS and the Redundant Switch. Make sure that the communications cable and the power cord for the preferred UPS (UPS-A) are connected to the same UPS.

If there are not enough outlets to connect all your equipment, use a Rack-mount PDU, available through the APC Web site, www.apc.com.

Note

APC Redundant Switch: Installation and Operation Manual 11