Sanyo C0971, C1271, CL0971, CL1271 service manual Using the Remote Control Unit

Page 67

Using the Remote Control Unit (continued)

How to Use the Remote When using the remote control unit, always point the unit’s transmitter head Control Unit directly at the air conditioner’s receiver.

Air conditioner (Indoor unit)

 

Receiver

Remote control

(Transmitter head)

unit

 

Remote Control Unit The remote control unit may be operated either from a non-fixed position or from Installation Position a wall-mounted position. To ensure that the air conditioner operates correctly, DO NOT install the remote control unit in the following places:

DO NOT • In direct sunlight

Behind a curtain or other places where it is covered

More than 26 feet (8 m) away from the air conditioner

In the path of the air conditioner’s airstream

Where it may become extremely hot or cold

Where it may be subject to electrical or magnetic noise

Where there is an obstacle between the remote control unit and air conditioner (since a check signal is sent from the remote control unit every 5 minutes)

Mounting the Remote Control Before mounting the remote control unit, press the ON/OFF operation button at Unit the mounting location to make sure that the air conditioner operates from that

location. The indoor unit should make a beeping sound to indicate that it has received the signal.

Remote control

Rear side

 

unit mount

 

Press

Mounting screws 5/32 x 5/8" (4 x 16 mm)

(included)

Set in place

Hole

To prevent loss of the remote control unit, you can connect the remote control unit to the mount by passing a string through the remote control unit and attachment hole.

 

To take out the remote control unit, pull it forward.

When Holding the Remote

• When using the remote control unit and during air conditioner operation, the

Control Unit

transmitter on the remote control unit should be pointed toward the receiver on

 

the indoor unit.

 

• Make sure that there are no objects between the remote control unit and

 

receiver which could block the signal.

OI-803-11-EG

11

 

Image 67
Contents KS0971 + C0971 + CL0971 KS1271 + C1271 + CL1271 DC Inverter Split System AIR ConditionerPlease Read Before Starting Table of Contents Checking Electrical Components Models KS0971 + C0971 KS1271 + C1271 Operating RangeModels KS0971 + CL0971 KS1271 + CL1271 C0971 SpecificationsUnit Specifications KS0971C1271 KS1271CL0971 CL1271 Indoor Unit Major Component SpecificationsCB-KS1271 Microprocessor 250V 3A Outdoor Unit C0971 Outdoor UnitOutdoor Unit C1271 Outdoor Unit CL0971 Outdoor Unit CL1271 Other Component Specifications Indoor Unit KS0971 Dimensional DataCL0971 CL1271 Outdoor Unit C0971 C1271After a tube has been insulated To break or crack Refrigerant Flow DiagramRefrigerant Flow Diagram Insulation of Refrigerant TubingPerformance Data Temperature ChartsIndoor Unit KS0971  Outdoor Unit CL0971 Indoor Unit KS1271  Outdoor Unit C1271 Indoor Unit KS1271  Outdoor Unit CL1271 Cooling Capacity Power Supply 115V Single Phase 60Hz Cooling CapacityC0971 / CL0971 C1271 / CL1271 Cooling Capacity Low Ambient 11,900 BTU/h Cooling Vertical distance ft Air Throw Distance ChartsRoom air temp F 26.7C Fan speed High Horizontal distance ft Air Axis Vertical Electrical Data Electrical CharacteristicsC0971 Cooling C1271 Cooling CL1271Indoor Unit KS0971 KS1271 Electric Wiring Diagrams8FA2-5257-71600-0 WHT RED Outdoor Unit C0971 C1271Outdoor Unit CL0971 CL1271 Address Setting of the Remote Control Unit MaintenanceHow to Connect How to DisconnectPAM- control FunctionsOperation Functions Emergency operationLamp colors Timer backupCT Peak current cut-off control Compressor discharge temperature controlProtective Functions Freeze preventionPrecautions before Performing Inspection or Repair TroubleshootingMethod of Self-Diagnostics Self-diagnostics Lamps Replace the circuit board or the fuse Using the TEST/T-RUN terminalsChecking the Indoor and Outdoor Units Replace the controllerCondition E01 Serial Communication Error Identification ProcedureOff Blinking Illuminated Before the OperationTerminal board Outdoor Unit Condition E12 Outdoor Fan Motor Trouble Diagnosis of Fan MotorNoise malfunction Noise Malfunction and Electromagnetic InterferenceElectromagnetic interference Measurement of Insulation Resistance for Electrical Parts Power Supply CordChecking Electrical Components Measurement of Insulation ResistanceChecking Continuity of Fuse on PCB Assy Characteristics Refrigerant R410A Special Precautions When Servicing UnitCharacteristics of New Refrigerant R410A What is New Refrigerant R410A?Checklist before Servicing Tools Specifically for R410A Tubing Installation ProceduresCase of Compressor Malfunction Procedure for Replacing CompressorExample Never charge a large amountUnit. This may cause Damage to the compressorWelding leaking points Case Refrigerant is LeakingRecharging Use of Existing Units When Tubes are ExtendedCharging Additional Refrigerant Retro-Fitting Existing SystemsKS0971 + C0971 + CL0971 KS1271 + C1271 + CL1271 Features Alert Symbols ContentsProduct Information Safety Instructions Installation LocationElectrical Requirements Names of Parts Quiet lamp Green and FAN green modeThis lamp lights during operation in the Quiet mode Unit Display and Operation ButtonRemote Control Unit Display Transmitter Remote Control UnitHR. Timer button Advance buttonAir conditioner makes the room cooler Setting to provide a quieter operating soundSet times every day. For details, see Setting the Timer Air conditioner reduces the humidity in the roomHow to Install Batteries Using the Remote Control UnitACL button ALL Clear Using the Remote Control Unit Set the FAN Speed selector button to the setting you want Operation with the Remote Control UnitPress the Mode selector button and select the desired mode Press the TEMP. setting buttons to change the temperaturePress the ON/OFF operation button Operation with the Remote Control UnitNight Setback Mode is used for saving energy Cooling and DRY ModeQuiet Mode Special Remarks Power failure during operationClicking sound is heard from the air conditioner Example To set to 1030 pm Setting the TimerOperation Indication 1030 pm 710 am 1100 am Present time Setting the TimerHow to set the on time Example To start operation at 710 am To cancel a timer program Press the Cancel buttonOperation together with the Daily ON/OFF Repeat Timer Using the 1-Hour OFF TimerSetting procedure Cancellation procedureSweep function Adjusting the Airflow DirectionSetting the airflow manually HorizontalControl Unit Care and CleaningWhen the air conditioner is not running Operation without the RemotePress in the bottom right Care and CleaningCleaning Intake grilleNegative ion generator metal electrodes inside plastic case How to clean the air clean filterWashing the grille with water Air clean filter FilterOperating Range TroubleshootingTrouble Possible Cause Remedy Appendix B Installation Instructions Contents Installation InstructionsPlease Read Before Starting Optional Copper Tubing Kit Tools Required for Installation not suppliedAccessories Supplied with Unit Table GeneralAdditional Materials Required for Installation Installation Site SelectionBaffle Plate for the Outdoor Unit CLxx models only For Air Discharge Recommended dimensions of the baffle platesAir Intake Baffle Air Discharge Baffle For Air IntakePrecautions for installation Installation procedure Air Intake BaffleRemove the Rear Panel from the Unit How to Install the Indoor UnitMake a Hole If Wooden Wall Install the Rear Panel on the WallIf Block, Brick, Concrete or Similar Type Wall Be sure to wear work gloves Remove the Grille to Install the Indoor UnitHow to remove the grille How to replace the grilleShape the Indoor Side Tubing Wiring Instructions General precautions on wiringDisconnect switch may be required by national or local codes Recommended Wire Length and DiameterWiring Instructions for Inter-unit Connections For Outdoor Unit For solid core wiring or F-cable Loose wiring may causeFore, be sure all wiring is How to connect wiring to the terminal For Indoor UnitRight-side tubing MountingLeft-side tubing Switching drain hose and drain capDrain cap Unit or operate it until all Do not supply power toTubing and wiring to the out To unmount indoor unitFirst refer to . Installation Site Selection How to Install the Outdoor UnitWiring Instructions for the Outdoor Unit Refrigerant Tubing Flaring Procedure with a Flare ToolUse of the Flaring Method To prevent heat loss and wet floors due to dripping of con Connecting Tubing between Indoor and Outdoor UnitsFinishing the Installation Insulation of Refrigerant TubingAir Purging Ant gas to leak. In order to Be sure to completely insertHex wrench before This may cause the refrigerHow to Test Run the Air Conditioner Pump Down Basic Functions of the Service ValvesMounting on a Wall Remote Control Unit Installation PositionAddress Setting of the Remote Control Unit Address Switch

CL0971, C1271, C0971, CL1271 specifications

The Sanyo CL1271, C0971, C1271, and CL0971 are a series of advanced audio and video technologies that showcase Sanyo's commitment to innovation and quality in consumer electronics. These models exemplify solid performance and versatility, catering to a wide range of user needs.

The Sanyo CL1271 is recognized for its compact design and robust functionality. It features high-definition video output, which elevates the viewing experience with crisp images and vibrant colors. Its energy-efficient design is an asset for users who are conscious of power consumption while still seeking premium performance. The device also incorporates advanced audio technologies, ensuring that sound quality matches the high-definition visuals. The integration of built-in speakers eliminates the need for additional audio equipment, making the CL1271 a convenient choice for casual viewing.

The Sanyo C0971 stands out for its user-friendly interface and connectivity features. Equipped with multiple ports, it supports various multimedia inputs, including HDMI, USB, and VGA. This adaptability allows users to connect an array of devices, making it an excellent choice for presentations or media playback. The C0971 also employs sophisticated image processing technology, enhancing the clarity and detail of both video and images. With a focus on ease of use, its intuitive menu navigation allows even novice users to access the full range of features without difficulty.

The Sanyo C1271 builds on the foundation established by its predecessors, adding additional enhancements in terms of screen resolution and color accuracy. With a full HD display, it offers exceptional picture quality that is ideal for both entertainment and educational purposes. This model is particularly suited for professional environments, thanks to its superior performance in bright settings. The C1271's durability and reliability are other key points, making it a long-term investment for users who value quality.

Finally, the Sanyo CL0971 combines portability with powerful features, making it an ideal option for individuals on the go. Its lightweight design ensures easy transport, while the battery life enables prolonged usage without the need for frequent recharges. This model's advanced connectivity options further enhance its versatility, allowing seamless integration with smartphones and tablets.

Overall, the Sanyo CL1271, C0971, C1271, and CL0971 represent a comprehensive solution for anyone seeking high-quality audio-visual equipment. With distinct features and technologies, these models cater to a diverse range of needs, ensuring that users experience the best of what Sanyo has to offer.