Schumacher PID-750 owner manual Problem Inverter Does Not Turn On

Page 10

5.Display shows HiP. Device demands more than 750 Watts continuous power.

Cycle inverter power OFF and ON.

If problem persists, use a larger inverter or a smaller device.

6.Display shows HoT. Inverter is too hot. Increase ventilation to inverter.

Move inverter to a cooler area.

Reduce the power consumption of the device. Inverter will automatically reset after cooling.

PROBLEM: Inverter Does Not Turn On

Reason/Solution

1.Poor contact at terminals. Unplug and reinsert PID-750.

2.Fuse is blown.

A blown fuse is usually caused by reverse polar- ity or a short circuit within the inverter. To replace, contact a qualified service technician who will diagnose the inverter and replace the fuse with the appropriate replacement.

3.Inverter may be defective.

See warranty and call Customer Service

800-621-5485 (Hours: 7 a.m. – 4:30 p.m. CST).

9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Includes Battery Cables Page Important Safety Instructions Before Using PID-750 power Inverter Wash hands after handlingConnecting to a 12 Volt Battery Operating instructionsPower Source Usage Examples Device Type Estimated WattageLED Display Troubleshooting Problem Alarm is OnProblem Inverter Does Not Turn On Specifications Limited Warranty Page Manual DEL Dueño Page Guarde Estas Instrucciones Instrucciones Importantes DE SeguridadLas manos después de manejarlo Antes de Usar el Inversor PID-750Instrucciones DE Operación Para conectar a una batería de 12 voltiosFuente DE Potencia Tipo de Dispositivo Vataje Estimado Ejemplos DE UsosLecturas POR LED Solución DE Problemas Problema El Inversor no se Enciende. Causa/SoluciónPage Problema El Inversor No se Enciende. Causa/Solución Especificaciones Garantía Limitada Page Notas
Top Page Image Contents